Package: installation-reports
report should be attached
HTH
Richard A Lough
Package: installation-reports
Boot method: CD
Image version: 19.11.2005 http://www.debian.org
Date: 19-23.11.2005
Machine: Homebuilt motherboard Abit K9 Raid
Processor: Duron 900Mhz
Memory: 375MB
Partitions: df -Tl
cannot be accessed?
regards
Richard A Lough
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
this some thought when configuring a new kernel.
regards
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
commented out of lilo.conf. Googling for
unknown-block(8,1) was not useful, so I am about to search for
unknown partition table
HTH
Richard A Lough
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sat, Nov 26, 2005 at 12:10:04PM +0100, Christian Perrier wrote:
Investigating what could have triggered this could be trickyunless
you can retry the install..:-)
Pardon my curiosity, but do you know why my IDE hard disk and the
DVD-ram disk at /dev/hda and /dev/hdd cannot be
Download + CDS all OS and all under $15-$99 just
http://plx.5cr2q4nykf5c26n.hitchiclah.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and other status info is available in
/var/log/debian-installer/.
Available if your really want them, but not attached.
Richard Wilson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: k3b
Version: 0.12.17-2
Severity: normal
It takes ages to add a lot of files to a DVD project, like by dragging
your home directory including hidden files to the project. Or by
adding a svn checkout of a moderately sized project (like gcc).
It looks like it exponentially get's slower
Package: openoffice.org-calc
Version: 2.0.4~rc3-1
Severity: important
Updating Openoffice.org to 2.0.4rc3-1 broke the chart function in
openoffice.org-calc. When modifying the data range on charts created
with earlier versions, the scale is removed from the x and y axes. That
is the range is
Package: cupsys
Version: 1.2.2-1
Severity: normal
Upgrade to 1.2.1 and 1.2.2 have broken the test page function for usb
printer HP PSC2210. The test page is generated in pieces on 6 separate
pages with blank pages between the printed pages. Setting cupsd.conf
log to debug generated over 600K
Package: linux-source-2.6.22
Version: 2.6.22-6
Severity: important
The system hangs perhaps once every two weeks, with nothing in the log.
This time I had a DVD-RAM with UDF filesystem mounted on /mnt.
On the command # umount /mnt
the system suffered a segmentation fault, with kernel.log as
Package: iptotal
Version: 0.3.3-6
Severity: important
The iptotal package installed on my NSLU2 ARM does not function correctly - The
iptotal application exits immediately after being started.
This is caused by the while condition for the getopt call on line 467 of
iptotal.c in
to be Autodetect.
NeilBrown
Hi Neil,
I changed sdd1 and sdd2 to linux raid autodetect. That solved
the problem.
Hmmm... I thought that mdadm.conf should have sorted that out.
Clearly it didn't.
Many thanks
Richard A Lough
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Package: libsane-dev
Version: 1.0.19~cvs20071028-1
Severity: normal
Running $ sane-find-scanner works correctly
The next test advised for a new installation is
$ scanimage -L
This fails.
I followed some advice and installed the following line in hp5590.conf
$ echo usb 0x03F0 0x1705
Package: libsane-dev
Version: 1.0.19~cvs20071028-1
Severity: normal
The scanner includes an automatic document feed (ADF) and
under normal operation there are no exceptional problems
when running the scanner using xsane.
When using ADF, paper jams occasionally occur. I closed
xsane when the
On Thu, Dec 13, 2007 at 10:40:51PM +0100, Julien BLACHE wrote:
Ilia Sotnikov [EMAIL PROTECTED] wrote:
Hi,
Is that possible to try latest sane-backends CVS version?
Richard, libsane 1.0.19~cvs20071213-1 will be available from
http://incoming.debian.org shortly, and on any unstable
the
reset button, the on/off switch, nor disconnecting the power lead had
any effect.
The bug is fixed IMHO. The reset switch is a sufficient remedy.
Let me know if I should confirm this by reinstalling the old code
and re-running the test.
Richard
--
To UNSUBSCRIBE, email to [EMAIL
Package: mdadm
Version: 2.6.3+200709292116+4450e59-3
Severity: important
This computer has, amongst others, two raid5 partitions.
The system is shut down via a standard command. When rebooted,
sdd1 and sdd2 are missing. The raid5 arrays get manually rebuilt
using the # mdadm --manage --re-add
about data loss. For #458327 please find below:
A) The state of one raid5 array before reboot
B) The state of the same raid5 array after reboot
C) A part copy of dmesg
I this is insufficient, please ask.
regards
Richard A Lough
Can't draw a straight line? Well...now you can!
http://slfxr.2roz5jkvhu29z32.deservedlyma.com
Religion is a defense against the experience of God.
Moderation is a fatal thing. Nothing succeeds like excess.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Little magic. Perfect weekends.
http://incredulous.getyourpils.info/?painedxtvuymiscegenationzsvHiroshima
We have over 20,000 registered users
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: munin-node
Version: 1.0.4-1
Severity: normal
According to http://www.linpro.no/projects/munin/ the latest stable
version is 1.2.0rc1. If you don't like release candidates, there is
always 1.1.9.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500,
Package: samba
Severity: normal
error message:
samba: Depends: samba-common (= 3.0.24-6+lenny3) but 3.0.26a-1 is to be
installed
I installed samba-common-3.0.26a-1 and for samba-3.0.26a-1 to depend on
a different release of samba-common seems wrong. It also prevents the
installation of samba
/richard/torrents/debian-testing-i386-DVD-1.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version
this success. Failures are as follows:
New, blank media is burned successfully. Once burned, it
is not possible to re-write the media. Different Media
may have different error messages but all fail.
Text below is with Verbatim DVD-RW media.
# cdrecord -dummy -vv speed=2 dev=/dev/sr0
/home/richard
Hello, stranger! :)
Early to rise and early to bed makes a male healthy and wealthy and dead.
Whenever you find that you are on the side of the majority, it is time to
reform.
A national debt, if it is not excessive, will be to us a national blessing.
--
To UNSUBSCRIBE, email to [EMAIL
)
at ./xine_part.moc:403
#15 0xb6aa2e1b in QObject::activate_signal () from
/usr/lib/libqt-mt.so.3
Richard.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-1-686
Package: kaffeine
Version: 0.8.4-2
Severity: important
After upating libxine1 to 1.1.6-2 kaffeine crashes once it tries
to start video. Downgrading to 1.1.2+dfsg-4 fixes this. Maybe
kaffeine needs to be rebuilt against this version?
-- System Information:
Debian Release: lenny/sid
APT
Package: linux-source-2.6.21-4 for amd64
Severity: normal
mouse driver selected as a module for kernel build via xconfig|make-kpkg
When logged into gdm the cursor is not activated by the mouse.
lsmod shows that the module psmouse is not loaded
running # insmod ./psmouse.ko gives segmentation
reloads the localhost:631 view. Other than being unable to
print a CUPS test page, the printer works well.
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cheap oem soft shipping worldwide
http://fbw.4ts4si9zryau4mmz9mmz94m4.firearmicec.com/?lvcuo
The time for thinkers has come.
Deep-seated are the wounds dealt in civil brawls.
To err is human, to forgive divine.
That's the secret to life... replace one worry with another
It's Richard Cornelius
Invite me http://bowemalovory.com/view.cgi?s=al2m=IIDCIF.iPdR,gfibjW,VSd
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Get discounted OEM software from Online Store!
http://ptn.0pmflz0bfsipf1i.ackharwarln.com
Moderation is a fatal thing. Nothing succeeds like excess.
Many a man's tongue broke his nose.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Package: hostapd
Version: ver 0.5.10
Severity: wishlist
The report is for an ASUS EEE pc with debian installed in place
of the manufacturers OS. The Wireless chipset is Atheros
I have set up WEP on the machine and this works. I can connect
with my iphone. WAP2 fails - I can see the wireless
* exim4/dc_eximconfig_configtype: mail sent by smarthost; received via SMTP or
fetchmail
exim4/no_config: true
* exim4/hide_mailname: false
* exim4/dc_postmaster: richard
exim4/dc_readhost:
* exim4/use_split_config: false
exim4/exim4-config-title:
The default configuration when using dpkg
Package: linux-image-686-smp
Version: 2.6.16-14
Severity: normal
The x86 kernel images do not provide the appletouch module, which
is required for the MacBook and MacBookPro touchpad to be supported.
Note that the kernel patch from lkml.org/2006/4/19/308 is required
for proper operation until
.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I have, or can generate other logs if needed. This machine is never
turned off so I am back in 2.6.15 to assure the UPS is functional.
Richard
--
To UNSUBSCRIBE, email
Please cancel this bug. I had my first USB failure with 2.6.15 after 37
hours. Must be a motherboard problem.
Thanks,
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
x-window-system-core xlibmesa-dri and xlibmesa-gl with
many warnings of broken dependencies. However X works, xdm on one
system and gdm on the other, with DRI and 3-D graphics.
Regardless, very nice!
Richard Wilson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
Package: im-switch
Version 1.7
dpkg --list im-switch
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version
The trick of Florian worked also for me: Although i did edit it manually.
I can login from KDM again into KDE. But some problems seem not yet
solved. Normally i could switch with the CTRL SPACE combination in QT
apps and in GTK apps between input methods. I use this to type
Chinese. But now i
Package: installation-reports
Boot method: CD
Image version: debian-testing-i386-netinst.iso, (beta 2) from Debian.org
website on 16 March
Date: 17 March 2006 ~ 15:00
Machine: Averatec AV3250H-01
Processor:
cpu family : 6
model : 10
model name : mobile AMD Athlon(tm) XP-M
Package: linux-kernel
Version: 10
Severity: normal
To reproduce use a standard clean install of debian 5 and install the openvz
kernel like this:
apt-get update apt-get -y upgrade apt-get -y install -t testing
linux-image-openvz-686
After restart poweroff with powerbutton does not work.
Package: postgresql-9.0
Version: 9.0.3-1
Severity: normal
initially not even the admin could access the
database because all the defaults expect port
5432. The 9.0 postgresql.conf file sets the
port to 5433. Changing the port back to 5432
allows access to the database using existing
settings
adicted to Krusader. Still one of the first things I install on
any new install, except those I don't intend to use every day. :)
Also running LMDE with Gnome Krusader, as well as ArchLinux soon to have
Krusader.
How are things in the world of fast trains?
saludos,
Richard.
2011/1/16 Zakhary
Package: libmagickcore2-extra
Version: libmagickcore2-7:6.5.7.8-1
Severity: critical
Justification: breaks unrelated software
apt-get install --reinstall imagemagic crashes when the changelog process
terminates with this message
imagemagick (7:6.5.5.3-1exp1) experimental; urgency=low
The SVG,
Package: udev
Version: 146-5
Severity: normal
Attempting to upgrade udev gives this:
apt-get install --reinstall udev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an
-base ...
Processing 1 changed doc-base file(s)...
Registering documents with scrollkeeper...
Processing triggers for man-db ...
Processing triggers for initramfs-tools ...
/boot/initrd.img-2.6.22-2-amd64 does not exist. Cannot update.
HTH
Richard A Lough
--
To UNSUBSCRIBE, email to debian
Package: xemacs21
Version: 21.4.22-2
Severity: normal
On attempting to modify some of my perl files some
symbols appeared to be missing using visual inspection.
Edit|Find showed that the symbols were still there.
Altering the font size from 9 to 12 revealed the '|'
hidden symbols.
--
Package: alsa-utils
Version: 1.0.21-1
Severity: wishlist
Tags: patch
This notebook will not produce sound 'out of the box'
and needs tweaking of sound settings to perform. Some
support either by default settings for alsa-mixer or
by a README-Asus-A6 is essential to have an easy
sound
Package: acpid
Version: 1:2.0.6-1
Severity: normal
I'm running linux-source.2.6.36-rc5 on Debian|testing/experimental
with 4 Opteron CPU's and filesystems on software raid.
I upgraded the kernel from 2.6.29 - that did not hibernate either,
but the tests got further, so I'm reporting a
Package: linux-source-2.6.35
Version: 2.6.35-1~experimental.3
Severity: normal
I tested kernel 2.6.36 and found that hibernation failed when the
process was attempting to suspend operation of CPU's 1,2 and 3.
I verified that hiberation proceeds if CPU's 1.2 and 3 are manually
suspended prior
Package: hal
Version: 0.5.11-6
Severity: normal
`/usr/bin/lshal` incorrectly reports the volume.fstype and volume.label
(in this case, for a preformatted VFAT Toshiba 31/2 External USB HD which
was reformatted to Ext3. The drive has only one partition.).
lshal reports that
block.device =
Package: mpd
Version: 0.15.12-1.1
Severity: normal
mpd is capable of indexing m4a files, but the meta info is not all there. the
artist name and album name work fine, but the track number is always 0 and
the genre is sometimes not being read properly.
output from a problem file:
Package: nfs-kernel-server
Version: 1:1.2.3-2
Severity: important
after upgrading my testing system and rebooting, the nfs kernel server
will no longer start, fails with error message:
FATAL: Error inserting nfsd
(/lib/modules/2.6.38-2-kirkwood/kernel/fs/nfsd/nfsd.ko): Unknown symbol in
Package: ppp
Version: 2.4.5-5
Severity: important
after upgrading to wheezy a previously functioning PPTP connection has
problems.
when the connection hangs up and the daemon tries to reconnect, the connection
fails
with the following log messages:
May 16 13:25:37 gary pppd[1403]: LCP
but that may have changed with
coldfire related changes?
Richard
---
Name and OpenPGP keys available from pgp key servers
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: bitcoind
Version: 0.3.21~dfsg-1
Severity: wishlist
The package lacks documentation :
1. The package summary should clarify that only bitcoind is included and
that the user must make separate provision if the bitcoin GUI client
is desired.
2. If it is intended that Debian will provide
Package: psensor
Version: 0.6.1.9-2
Severity: important
Monitoring 4 CPU's and one hard drive
updates every second, graphs 1000 sec.
After 12 hours running memory useage is 350Mb
and CPU useage is 85-95%
Does not display numerical values - that panel
is blank, but time, and temperatures are
Package: cups
Version: 1.4.7-1
Followup-For: Bug #636303
just updated cups and kernel to latest unstable, i have the same problem,
printer is listed, but trying to print to it
causes the same error message to be repeated forever. i am using a USB printer.
-- System Information:
Debian
and
the problem
happened one level up :
#2 0x804b05fe in fold_rtx (x=0xc83c4f30, insn=0xc83cc1c0) at
../../src/gcc/cse.c:3279
Richard
---
Name and OpenPGP keys available from pgp key servers
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe
On Thu, Jul 14, 2011 at 06:47:28PM +, Thorsten Glaser wrote:
Richard dixit:
equiv_constant is called with NULL pointer, I would think this is
illegal and the problem happened one level up :
Probably.
(gdb) frame 1
#1 0x804b0542 in fold_rtx (x=0xc83cb5f4, insn=0xc83cc1c0
Package: gdm3
Version: 3.0.4-4
Severity: normal
Dear Maintainer,
I manually removed gdm and installed gdm3.
The login screen offers a menu of all the valid users
and I logged in under my username.
The applications menus under gdm3 is missing several
items, the major item is the ability to
Package: debian-cd
Version: 3.1.5
Severity: minor
When attempting to build a debian-cd for the 'testing' release, via simple-cdd,
debian-cd creates symlinks beneath tmp/debian-cd/data which maps the 'sid'
release onto 'squeeze'. However, there are no corresponding links created
for the
/x86_64-linux-gnu/libXrandr.so.2.2.0
7fc1c5c34000-7fc1c5c35000 rw-p 7000 08:01 22931264
/usr/lib/x86_64-linux-gnu/libXrandr.so.2.2.0
7fc1c5c35000-7fc1c5c9b000 r-xp 08:01 27312150
/home/richard/test/Diablo/DiabloMiner/target/libs/natives/linux
Package: wmbattery
Version: 2.41
Severity: grave
Justification: renders package unusable
After the upgrade in Debian testing from kernel 3.10-2 to 3.10-3, on several
systems wmbattery stopped working. These systems include i686 and amd64
laptops. The CLI acpi shows the right status of the
Subject: apt: Apt fails in upgrade to jessie when setting up upower (0.9.21-3)
Package: apt
Version: 0.9.9.4
Justification: Policy 2.5 Priorities required
Severity: serious
Tags: d-i
Dear Maintainer,
I was in the process of upgrading from “stable” to “testing” (jessie) and
apt-get dist upgrade
found
It stops here.
Richard.
-- Package-specific info:
X server symlink status:
lrwxrwxrwx 1 root root 13 Jun 19 2012 /etc/X11/X - /usr/bin/Xorg
-rwxr-xr-x 1 root root 2397280 Sep 22 23:49 /usr/bin/Xorg
VGA-compatible devices on PCI bus
Package: nepomuk-core-data
Version: 4:4.14.0-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was
Package: synaptic
Version: 0.81.2
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Installed debian KDE desktop without root password ie. uses sudo.
* What exactly did you do (or not do) that
Hi Tomasz,
I thought about that too before considering packaging it, but it looks
like it's dual licensed, and patents are only here to protect the
commercial part.
According to https://github.com/NTRUOpenSourceProject/ntru-crypto :
"Security Innovation, Inc., the owner of the NTRU public
Package: installation-reports
Severity: normal
Tags: d-i
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the
Package: gimp
Version: 2.10.6-2
Followup-For: Bug #906244
Dear Maintainer,
Gimp crashes upon initiation. The starting splash screen appears but is grey
and after the Crash Debug screen appears. Restart GIMP button cannot restart
gimp. After closing the gimp crash debug screen gimp will restart
from, gnome 2 to gnome 3.
Richard
-- System Information:
Debian Release: 9.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-8-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap
ave the option to boot in BIOS/legacy mode.
So in summary, the only combination that didn't work was the Debian testing
with my laptop.
Please let me know if you require any additional information.
Richard
iso files ( i.e. today I tried
running debian-live-testing-amd64-gnome+nonfree.iso with a last modified
date of 2019-10-14) and they all return the same errors I reported on
September 21, 2019.
Richard
Package: znc
Version: 1.7.5-1~bpo10+1
Severity: important
Dear Maintainer,
The ZNC package now ships with a system user called `_znc`, rather than
`znc`. This is causes an issue when oidentd is installed and the default
configuration is not overridden. Most IRC networks will treat `_znc` as
an
Update: This is the full output of `systemctl show mnt-backup.mount`,
it was truncated in my previous message.
TimeoutUSec=1min 30s
ControlPID=0
DirectoryMode=0755
SloppyOptions=no
LazyUnmount=no
ForceUnmount=no
Result=success
UID=[not set]
GID=[not set]
MemoryCurrent=[not set]
CPUUsageNSec=[not
Package: stterm
Version: 0.8.2-1
Severity: important
Dear Maintainer,
With st, i ran
$ htop
Error opening terminal: st-256color.
$
but after I added
[ $TERM = st-256color ] && export TERM=xterm-256color
to my bashrc, htop worked
perhaps a change the default TERM value in config.def.h would be
Package: stterm
Version: 0.8.4-1
Followup-For: Bug #983578
X-Debbugs-Cc: arfisna...@mailnesia.com
Dear Maintainer,
Makes sense that it's not proper solution and thank you for your feedback.
Using st and dash I got the following.
$ dpkg -L ncurses-term|grep st-256color
Package: stterm
Version: 0.8.4-1
Followup-For: Bug #983578
X-Debbugs-Cc: arfisna...@mailnesia.com
Dear Maintainer,
Oops, forgot to mention that it happens locally, and not remotely via something
like ssh.
Thanks
Kernel: Linux 5.10.0-8-amd64 (SMP w/1 CPU thread)
Locale: LANG=en_US.UTF-8,
Package: xorg
Version: 1:7.7+23
Severity: important
Dear Maintainer,
Upgrade from Debian 11 desktop with little customisation. Debian 11 was up to
date
- standard changes to sources.list
- apt update
- apt upgrade
After installing all new packages and rebooting, no GUI at all
X server not
I second this report. The app did use to work actually, but recently - not
sure with transitioning to ausweisapp with v2.0 or later, this breaks for
me too. This renders the app completely unusable, at least using Gnome,
which should justify a severity of important. It's quite irrelevant if the
Am Mo., 15. Jan. 2024 um 21:38 Uhr schrieb John Paul Adrian Glaubitz <
glaub...@physik.fu-berlin.de>:
> On Mon, 2024-01-15 at 19:29 +0100, Richard wrote:
> > I second this report. The app did use to work actually, but recently -
> not sure with
> > transitioning to auswe
Am Di., 16. Jan. 2024 um 20:41 Uhr schrieb John Paul Adrian Glaubitz <
glaub...@physik.fu-berlin.de>:
> > Who says I am? I am running testing. Also, getting security updates
> from unstable is actually
> > recommended behavior, so the stuff around "FrankenDebian" is
> contradicting itself.
>
>
Am Mi., 17. Jan. 2024 um 17:08 Uhr schrieb John Paul Adrian Glaubitz <
glaub...@physik.fu-berlin.de>:
> > This is exactly what it's supposed to mean. Packages distributed by
> Debian are obviously required
> > to not be broken when they hit stable. Otherwise an update wouldn't be
> accepted to
Qt based apps, even less
that can make use of a tray icon, and then less that are already based on
Qt 6, independent of their use of tray icons.
Richard
Am Mi., 17. Jan. 2024 um 15:24 Uhr schrieb A. Klitzing :
> Hi there,
>
> the AusweisApp has no autostart option on Linux. Di
Package: file-roller
Version: 43.1-1
Severity: important
Dear Maintainer,
it seems the version of file-roller is partially broken, possibly due to the
fact that it still lists p7zip-full as dependency and not the new 7zip
package
and thus might be missing some adaptation. Maybe some behavior of
Package: input-remapper-gtk
Version: 2.0.1-1
Severity: minor
Dear Maintainer,
this is a really minor issue, but upon finishing installation (from
terminal),
I'm greeted by this error message:
Notices:
/usr/lib/python3/dist-packages/inputremapper/gui/controller.py:304:
SyntaxWarning: invalid
3 firmware that's not an issue anymore.
Greetings,
Richard
Package: epiphany-browser
Version: 46.0-2
Severity: important
X-Debbugs-Cc: bug.repor...@mail.sheugh.com
Dear Maintainer,
A previously installed debian system** was reconfigured via
the intallation of debian-12-5 from a dvd. That 'bookworm'
installation was updated to 'trixie' almost
Package: mesa-va-drivers
Version: 24.0.6-1+b1
Severity: important
Dear Maintainer,
I'm not sure if this is the right package to report this issue to, as there
recently have been many package updates due to the time_t transition. But mpv,
VLC and Firefox are no longer able to access VA-API while
a tweaked version of the acidbase patch file will fix this?
System in use is Debian GNU/Linux 2.6.8-2-386, snort version 2.3.3-2,
php4 version 4.3.10-16.
Thanks,
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
/urchin.js
Cheers,
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sat, 26 Nov 2005, Hadmut Danisch wrote:
Hi,
Hello
rmail can't be installed with postfix, it depends on sendmail.
It should instead depend on mail-transport-agent
Actually, it is worse than that :(
$dpkg -s rmail
Depends: sendmail-bin | mail-transport-agent, libc6 (= 2.3.5-1),
On Sun, 27 Nov 2005, Hadmut Danisch wrote:
Package: sendmail
Version: 8.13.5-3
Hi,
Hello again :)
when the debian sendmail package is removed but not purged (e.g. to
test other MTAs but keeping the config files to have the way back to
sendmail) the cronjob /etc/cron.d/sendmail keeps
!
#
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
Richard.
diff -ur java-package.orig/ibm-j2re1.5/install java-package/ibm-j2re1.5/install
--- java-package.orig/ibm-j2re1.5/install 2005-12-01 13:27:52.0 +
+++ java-package/ibm-j2re1.5/install 2005-12-01 13:09:45.0 +
@@ -12,9 +12,14 @@
# alternative program
function
potential misalignments are. I added some extra (void*)
casts to get rid of what seem to be false warnings.
The patch has only been tested on sparc64 and allows me to connect my
Windows XP machine using l2tp.
Regards
Richard
-- System Information:
Debian Release: testing/unstable
APT prefers
(an RFE for the first and a bug report
for the second) at http://sf.net/projects/gaim that'd be great. I know
the log searching needs work, but I don't know when I'll get to it.
Thanks,
Richard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
1 - 100 of 3969 matches
Mail list logo
