Any recommended perl version for windows environment , which isn't causing
any crashes .?
Currently using perl_5.20.2__4-assp.zip
<https://sourceforge.net/projects/assp/files/ASSP%20V2%20multithreading/ASSP%20V2%20module%20installation/perl_5.20.2__4-assp.zip/download>
On Thu, Oct 27, 2016 at 7:46 PM, Thomas Eckardt/eck [via Anti-Spam SMTP
Proxy Server] <ml-node+s996265n41897...@n3.nabble.com> wrote:
> Perl crashes are most times caused by:
>
> - 'out of memory' conditions on 32Bit Perl
> - wrong designed regular expressions
> - destroyed BerkeleyDB ENV files
> - outdated perl modules
>
> Thomas
>
>
> Von: Scott MacLean <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=0>>
> An: ASSP development mailing list <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=1>>
> Datum: 27.10.2016 15:06
> Betreff: Re: [Assp-test] assp settings new installation
>
>
>
> My installation has always done this. If you run it in console mode (or
> look at your event log), I think you'll find that like mine, the
> Perl.exe process is crashing. When it does, ASSP never gets the
> opportunity to log anything, because the Perl engine has already quit.
>
> I have never found a smoking gun as to the cause, nor a solution - I
> just have my service set to restart when it terminates. It's getting
> close to the time where I will be replacing this mail server and
> building a new one, I'll use a newer version of Perl to see what effect
> that has (I'm now using 5.20.1).
>
> On 10/27/2016 5:20 AM, vj wrote:
> > Nope , Didn't found any relevant logs,
> >
> >
> ------------------------------------------------------------
> ------------------------------------------------------------
> --------------------------------------------------------------------------------
>
> > Oct-27-16 09:39:37 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=2>>
> > to: [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=3>
> info: read and processed 65536 byte of DATA
> > Oct-27-16 09:39:37 [Worker_6] info: wrote 3 byte to server
> > Oct-27-16 09:39:37 m1-57575-00156 [Worker_6] [MessageOK] 209.x.x.x <
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=4>>
> to: [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=5>
> info: all DATA written to server -
> sent
>
> > [CR][LF].[CR][LF]
> > Oct-27-16 09:39:37 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=6>>
> > to: [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=7>
> info: read and processed 65536 byte of DATA
> > Oct-27-16 09:39:37 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=8>>
> > to: [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=9>
> info: read and processed 65536 byte of DATA
> > Oct-27-16 09:39:37 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=10>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=11> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=12>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=13> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=14>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=15> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 [Worker_2] info: wrote 22 byte to server
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=16>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=17> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=18>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=19> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=20>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=21> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=22>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=23> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 [Worker_6] info: wrote 6 byte to server
> > Oct-27-16 09:39:38 m1-57575-00156 [Worker_6] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=24>> to:
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=25>
> info: no (more) data readable from 209.x.x.x
> (connection
> > closed by peer) - last command was 'QUIT'
> > Oct-27-16 09:39:38 m1-57575-00156 [Worker_6] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=26>> to:
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=27>
> finished message - received DATA size: 17.39 kByte -
> sent
> > DATA size: 17.81 kByte
> > Oct-27-16 09:39:38 m1-57575-00156 [Worker_6] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=28>> to:
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=29>
> disconnected: session:2C14FC24 209.x.x.x - command
> list
>
> > was 'EHLO,MAIL FROM,RCPT TO,DATA,QUIT' - used 8 SocketCalls - processing
> > time 4 seconds - damped 0 seconds
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=30>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=31> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=32>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=33> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=34>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=35> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=36>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=37> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=38>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=39> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 [Worker_2] 45.x.x.x info: authentication - login is
> used
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=40>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=41> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 [Worker_2] info: wrote 12 byte to server
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=42>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=43> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:39:38 m1-57564-00833 [Worker_7] 209.x.x.x <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=44>>
> > to: [hidden email]
> <http:///user/SendEmail.jtp?type=node&node=41897&i=45> info: read and
> processed 65536 byte of DATA
> > Oct-27-16 09:40:04 [startup] Info: lib/CorrectASSPcfg.pm loaded
> > Oct-27-16 09:40:04 [startup] Info: sub 'set' in module CorrectASSPcfg.pm
> is
> > called
> > Oct-27-16 09:40:05 [startup] Starting as a service
> > Oct-27-16 09:40:12 [startup] ASSP version 2.5.4(16294) (Perl 5.020002)
> (on
> > MSWin32) initializing
> > Oct-27-16 09:40:12 [startup] Info: RBLServiceProvider: registered 2
> reply
> > weights for bl.mailspike.net
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'BadAttachL1 <bad
> > attachment L1>' - length in byte before: 101 - after: 115
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'BadAttachL2 <bad
> > attachment L2>' - length in byte before: 101 - after: 115
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'BadAttachL3 <bad
> > attachment L3>' - length in byte before: 101 - after: 115
> > Oct-27-16 09:40:12 [startup] Info: queued command 'fillSpamfiles' to
> High
> > Workers
> > Oct-27-16 09:40:12 [startup] Info: CPU Affinity changed for startup from
> ''
> > to '0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18'
> > Oct-27-16 09:40:12 [startup] Info: registered encrypted POP3ConfigFile
> file
>
> > C:/assp/files/pop3cfg.txt
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'BounceSenders
> > <Bounce Senders>' - length in byte before: 32 - after: 33
> > Oct-27-16 09:40:12 [startup] Info: loading groups from groupsfile
> > C:/assp/files/groups.txt
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'redRe <redRe>' -
> > length in byte before: 586 - after: 591
> > Oct-27-16 09:40:12 [startup] Info: optimized regex for 'spamLovers <All
> > Spam-Lover>' - length in byte before: 48 - after: 53
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for
> 'whiteListedDomains
> > <Whitelisted Domains>' - length in byte before: 11,615 - after: 7,849
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for 'localDomains
> <Local
> > Domains>' - length in byte before: 14,559 - after: 12,845
> > Oct-27-16 09:40:13 [startup] Info: enabled 5 recipient replacement rules
> -
> > 0 invalid rules skipped
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for 'myServerRe
> <Local
> > Host Names>' - length in byte before: 148 - after: 156
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for
> 'validFormatHeloRe
> > <validFormatHeloRe>' - length in byte before: 104 - after: 105
> > Oct-27-16 09:40:13 [startup] Info: invalidFormatHeloRe : regex
> > \d{1,3}[-x.]\d{1,3}[-x.]\d{1,3} - weight set to 0.5
> > Oct-27-16 09:40:13 [startup] Info: invalidFormatHeloRe : regex \.user -
> > weight set to 0.5
> > Oct-27-16 09:40:13 [startup] Info: invalidFormatHeloRe : regex
> \.veloxzon$
> > - weight set to 0.5
> > Oct-27-16 09:40:13 [startup] Info: invalidFormatHeloRe : regex ^ylmf-pc$
> -
> > weight set to 201
> > Oct-27-16 09:40:13 [startup] Info: Regex invalidFormatHeloRe: 4 weighted
> > regular expression defined
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for
> 'invalidFormatHeloRe
> > <invalidFormatHeloRe>' - length in byte before: 174 - after: 186
> > Oct-27-16 09:40:13 [startup] Info: optimized regex for
> 'blackListedDomains
> > <Blacklisted Domains>' - length in byte before: 6,844 - after: 5,208
> > Oct-27-16 09:40:14 [startup] Info: optimized regex for 'invalidPTRRe
> > <invalidPTRRe>' - length in byte before: 25,975 - after: 26,154
> > Oct-27-16 09:40:14 [startup] Info: optimized regex for 'validPTRRe
> > <validPTRRe>' - length in byte before: 168 - after: 169
> > Oct-27-16 09:40:14 [startup] Info: optimized regex for
> 'maxSMTPdomainIPWL
> > <Max IP/Domain Whitelisted Domains>' - length in byte before: 75 -
> after: 80
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for 'whiteSenderBase
> > <whiteSenderBase>' - length in byte before: 4,696 - after: 3,907
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for
> > 'CountryCodeBlockedRe <CountryCodeBlockedRe>' - length in byte before:
> 86 -
>
> > after: 82
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for 'NoCountryCodeRe
> > <NoCountryCodeRe>' - length in byte before: 23 - after: 28
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for 'CountryCodeRe
> > <CountryCodeRe>' - length in byte before: 89 - after: 79
> > Oct-27-16 09:40:15 [startup] Warning: MyCountryCodeRe is currently not
> > configured
> > Oct-27-16 09:40:15 [startup] Info: MyCountryCodeRe is now set to '' -
> > resolved by SenderBase
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for
> 'spamtrapaddresses
> > <PenaltyBox Trap Addresses>' - length in byte before: 91 - after: 96
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for 'strictSPFRe
> > <strictSPFRe>' - length in byte before: 191 - after: 164
> > Oct-27-16 09:40:15 [startup] Info: optimized regex for 'blockstrictSPFRe
> > <blockstrictSPFRe>' - length in byte before: 36 - after: 36
> > Oct-27-16 09:40:15 [startup] Info: RBLServiceProvider: registered 2
> reply
>
> > weights for bl.mailspike.net
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'URIBLCCTLDS
> > <Country Code TLDs>' - length in byte before: 115,654 - after: 77,026
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'URIBLwhitelist
> > <Whitelisted URIBL Domains>' - length in byte before: 73 - after: 78
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex Phishing\. -
> > weight set to 0.75
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Email.Spam\d{1,4}-SecuriteInfo - weight set to 0.67
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > (?:Email|HTML|Sanese.....am|Scam)[a-z0-9]?)\. - weight set to 0.75
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Sanesecurity\.(?:Hdr|Img|ImgO|Junk|Doc|Casino)\. - weight set to 1
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Sanesecurity\.(?:Lott|Fake|SpamImg|Job|Stk)\. - weight set to 1
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Sanesecurity\.(?:Loan|Porn|Bou|Dipl|Cred)\. - weight set to 1
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Sanesecurity\.Jurlbl\.Auto\. - weight set to 0.26
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > Sanesecurity\.Jurlbl\. - weight set to 0.43
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> winnow\.phish\.
> > - weight set to 1
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> winnow\.spam\. -
> > weight set to 0.34
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> > INetMsg\.SpamDomain-2w\. - weight set to 0.33
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex INetMsg\. -
> > weight set to 0.16
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex
> MSRBL-Images\. -
> > weight set to 0.34
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex MSRBL-SPAM\.
> -
> > weight set to 0.84
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex Safebrowsing
> -
>
> > weight set to 0.2
> > Oct-27-16 09:40:18 [startup] Info: SuspiciousVirus : regex Heuristics -
> > weight set to 0.2
> > Oct-27-16 09:40:18 [startup] Info: Regex SuspiciousVirus: 16 weighted
> > regular expression defined
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'SuspiciousVirus
> > <SuspiciousVirus>' - length in byte before: 438 - after: 456
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'preHeaderRe
> > <preHeaderRe>' - length in byte before: 123 - after: 114
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'bombSenderRe
> > <bombSenderRe>' - length in byte before: 55 - after: 55
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'bombHeaderRe
> > <bombHeaderRe>' - length in byte before: 123 - after: 132
> > Oct-27-16 09:40:18 [startup] Info: optimized regex for 'bombCharSets
> > <bombCharSets>' - length in byte before: 124 - after: 121
> > Oct-27-16 09:40:19 [startup] Info: bombRe : regex buy c+heap - weight
> set
> > to 60
> > Oct-27-16 09:40:19 [startup] Info: Regex bombRe: 70 weighted regular
> > expression defined
> > Oct-27-16 09:40:19 [startup] Info: optimized regex for 'bombRe <bombRe>'
> -
> > length in byte before: 17,779 - after: 17,872
> > Oct-27-16 09:40:19 [startup] Info: optimized regex for 'blackRe
> <blackRe>'
> > - length in byte before: 285 - after: 235
> > Oct-27-16 09:40:19 [startup] Warning: NO MSGIDsig-secrets activated -
> > MSGIDsig-check is now disabled : 10 records ignored because of wrong
> > syntax or using default values :
> > 0=key0|1=key1|2=key2|3=key3|4=key4|5=key5|6=key6|7=key7|8=key8|9=key9
> > Oct-27-16 09:40:19 [startup] Info: 10 BATV-secrets activated
> > Oct-27-16 09:40:19 [startup] Info: switched (DNS) nameserver order from
> to
> > 162.222.225.90 , 5.100.152.13 , 172.16.220.252 , 172.21.220.254
> > Oct-27-16 09:40:19 [startup] Info: optimized regex for
> 'BlockReportFilter
> > <BlockReportFilter>' - length in byte before: 32 - after: 37
> > Oct-27-16 09:40:19 [startup] Info: optimized regex for '<TLDS>' - length
> in
> > byte before: 10032 - after: 8494
> > Oct-27-16 09:40:19 [startup] Info: an ASSP restart will be done using
> the
> > AutoRestartCmd
> > Oct-27-16 09:40:20 [startup] ASSP version 2.5.4(16294) (Perl 5.020002)
> (on
>
> > MSWin32)running on server: hostname (209.99.16.137)
> > Oct-27-16 09:40:20 [startup] Info: unicode support is available on this
> > system
> > Oct-27-16 09:40:20 [startup] Info: this system uses little-endianess
> > Oct-27-16 09:40:20 [startup] Info: Perl will search for modules in the
> > following folders:
> > 'C:/assp/lib'
> > 'c:/perl/site/lib'
> > 'c:/perl/lib'
> > '.'
> > 'C:/assp'
> > 'C:/assp/Plugins'
> > Oct-27-16 09:40:20 [startup] Info: beside the default Perl search
> pathes,
>
> > this list has to contain:
> > C:/assp
> > C:/assp/lib
> > C:/assp/Plugins
> > Oct-27-16 09:40:20 [init] Info: analysing windows system environment
> > Oct-27-16 09:40:20 [init] Info: windows system environment looks OK
> > Oct-27-16 09:40:20 [init] Threads module 2.02 installed
> > Oct-27-16 09:40:20 [init] Threads::shared module 1.48 installed
> > Oct-27-16 09:40:20 [init] Thread::Queue module 3.07 installed
> > Oct-27-16 09:40:20 [init] IO::Poll module 0.09 installed
> > Oct-27-16 09:40:20 [init] IO::Select module 1.22 installed
> > Oct-27-16 09:40:20 [init] ASSP is using IOEngine - select
> > Oct-27-16 09:40:20 [init] Thread::State module version 0.09 installed
> and
>
> > available
> > Oct-27-16 09:40:20 [init] IO::Socket::INET6 module is not detected (
> > enableINET6 is not set ).
> > Oct-27-16 09:40:20 [init] Net::LDAP module version 0.65 installed and
> > available
> > Oct-27-16 09:40:20 [init] Net::DNS module version 1.06 installed and
> > available
> > Oct-27-16 09:40:20 [init] Net::SMTP module version 3.08 installed and
> > available
> > Oct-27-16 09:40:20 [init] Net::SMTP::SSL module version 1.02 installed
> and
> > available
> > Oct-27-16 09:40:20 [init] NetSNMP::agent module is disabled in config.
> > Oct-27-16 09:40:20 [init] Mail::SPF module version 2.007 installed and
> > available
> > Oct-27-16 09:40:20 [init] Warning: Mail::SPF module version 2.007 is
> > installed but at least version 2.009 is recommended
> > Oct-27-16 09:40:20 [init] Compress::Zlib module version 2.069 installed
> -
> > HTTP compression available
> > Oct-27-16 09:40:20 [init] Digest::MD5 module version 2.54 installed -
> > delaying can use MD5 keys for hashes
> > Oct-27-16 09:40:20 [init] Digest::SHA1 module version 2.13 installed -
> BATV
> > and FBMTV check available
> > Oct-27-16 09:40:20 [init] File::ReadBackwards module version 1.05
> installed
> > - searching of log files enabled
> > Oct-27-16 09:40:20 [init] Time::HiRes module version 1.9728 installed -
> CPU
> > usage statistics available
> > Oct-27-16 09:40:20 [init] Sys::Syslog module version 0.33 installed -
> Unix
> > centralized logging enabled
> > Oct-27-16 09:40:20 [init] Win32::Daemon module version 20131206
> installed -
> > can run as Win32 service
> > Oct-27-16 09:40:20 [init] Win32::API::OutputDebugString module is
> disabled
> > in config - unable to debug to Win32 API
> > Oct-27-16 09:40:20 [init] Unicode::GCString module version 2013.10
> > installed - can detect east asian language strings as sequence of UAX
> #29
> > Grapheme Clusters to analyze Bayes and HMM
> > Oct-27-16 09:40:20 [init] Unicode::Normalize module is installed and
> > 'unicodeNormalize' is enabled - NFKC unicode normalization is globaly
> > enabled
> > Oct-27-16 09:40:20 [init] Text::Unidecode module version 1.27 installed
> -
>
> > can transliterate unicode characters to ASCII
> > Oct-27-16 09:40:20 [init] Win32::Unicode module version 0.38 installed -
> > can write unicode filenames to OS
> > Oct-27-16 09:40:20 [init] Tie::RDBM module version 0.73 installed -
> > database usage available
> > Oct-27-16 09:40:20 [init] DB_File module is disabled in config - DB_File
> > (Berkeley V1) database usage not available
> > Oct-27-16 09:40:20 [init] BerkeleyDB module version 0.55 installed -
> > Berkeley database usage available
> > Oct-27-16 09:40:20 [init] BerkeleyDB DB-version 6.0 / Berkeley DB
> 6.0.20:
> > (June 24, 2013) is installed
> > Oct-27-16 09:40:20 [init] BerkeleyDB maximum cache size is set to 50MB
> > Oct-27-16 09:40:20 [init] Info: griplist is using basic 'orderedtie' in
> > file C:/assp/database/griplist
> > Oct-27-16 09:40:20 [init] Net::CIDR::Lite module version 0.21 installed
> -
> > hyphenated IP address range available
> > Oct-27-16 09:40:20 [init] NetAddr::IP::Lite module version 1.56
> installed -
> > hyphenated IP and CIDR address range calculation available
> > Oct-27-16 09:40:20 [init] Net::IP module version 1.26 installed -
> > hyphenated IP and CIDR address range calculation available
> > Oct-27-16 09:40:20 [init] LWP::Simple module version 6.15 installed -
> > procedural LWP interface available
> > Oct-27-16 09:40:20 [init] Email::MIME module version 1.936 installed -
> MIME
> > charset decoding and conversion interface and attachment detection
> available
> > Oct-27-16 09:40:20 [init] MIME::Types module version 2.12 installed -
> TNEF
> > conversion may possible
> > Oct-27-16 09:40:20 [init] Email::Send module version 2.201 installed -
> > sending .eml files available
> > Oct-27-16 09:40:20 [init] Convert::TNEF module is disabled in config -
> TNEF
> > conversion not available
> > Oct-27-16 09:40:20 [init] Mail::DKIM::Verifier module version 0.38
> > installed - DKIM verification is available
> > Oct-27-16 09:40:20 [init] Schedule::Cron module version 1.01 installed -
> > RebuildSpamdb Scheduler is available
> > Oct-27-16 09:40:20 [init] Sys::MemInfo module version 0.98 installed -
> > memory calculation is available
> > Oct-27-16 09:40:20 [init] Sys::CpuAffinity module version 1.06 installed
> -
> > setting CPU Affinty is available - this system has 32 CPU's
> > Oct-27-16 09:40:20 [init] The Cpu Affinity of assp is currently '0 1 2 3
> 4
> > 5 6 7 8 9 10 11 12 13 14 15 16 17 18'
> > Oct-27-16 09:40:20 [init] Authen::SASL module version 2.16 installed -
> SMTP
> > AUTH is available
> > Oct-27-16 09:40:20 [init] Regexp::Optimizer module version 0.23
> installed -
> > default Regular Expression Optimization is available
> > Oct-27-16 09:40:20 [init] AsspSelfLoader module version 2.03 installed -
> > ASSP Code Load Optimization is available
> > Oct-27-16 09:40:20 [init] ASSP_WordStem module version 1.27 installed -
> > ASSP multi lingual word stemming engine for Bayesian and HMM checks is
> > available
> > Oct-27-16 09:40:20 [init] ASSP_FC module version 1.05 installed - ASSP
> file
> > commander is available
> > Oct-27-16 09:40:20 [init] ASSP_SVG module version 1.03 installed - ASSP
> > graphical STATS are available
> > Oct-27-16 09:40:20 [init] Info: openssl version 0.9.8y is installed
> > Oct-27-16 09:40:20 [init] IO::Socket::SSL module version 2.022 installed
> -
>
> > https and TLS/SSL is possible
> > Oct-27-16 09:40:20 [init] Found valid certificate and private key file -
> > https and TLS/SSL is available
> > Oct-27-16 09:40:49 [init] The underlying SSL library Net::SSLeay version
> > 1.72 uses OpenSSL 1.0.2c 12 Jun 2015
> > Oct-27-16 09:40:49 [init] SSL_read_ahead will be used
> > Oct-27-16 09:40:49 [init] Info: assp has successfully loaded 380 Perl
> > modules in to its namespace
> > Oct-27-16 09:40:49 [init] Warning: RelayOnlyLocalSender nor
> > RelayOnlyLocalDomains is enabled!
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled exportInterval ->
> nextExport
>
> > for Oct-27-16 12:24:10
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled backupDBInterval ->
> > nextDBBackup for Oct-27-16 10:38:38
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled CleanPBInterval ->
> > nextCleanPB for Oct-27-16 12:24:41
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled CleanDelayDBInterval ->
> > nextCleanDelayDB for Oct-27-16 12:24:41
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled POP3Interval ->
> > NextPOP3Collect for Oct-27-16 09:40:49
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled ReloadOptionFiles ->
> > nextOptionCheck for Oct-27-16 09:43:04
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled ReloadOptionFiles ->
> > nextHashFileCheck for Oct-27-16 09:43:04
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled LDAPcrossCheckInterval ->
> > nextLDAPcrossCheck for Oct-27-16 12:24:00
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled GroupsReloadEvery ->
> > NextGroupsReload for Oct-28-16 01:08:42
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled MemoryUsageCheckSchedule
> ->
> > nextMemoryUsageCheckSchedule for Oct-27-16 09:50:00
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled CleanCacheEvery ->
> > nextCleanCache for Oct-27-16 12:24:05
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled MaxLogAgeSchedule ->
> > nextLogAgeSchedule for Oct-27-16 09:40:49
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled BlockReportSchedule ->
> > nextBlockReportSchedule for Oct-27-16 09:40:49
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled UpdateWhitelist ->
> saveWhite
> > for Oct-27-16 10:26:46
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled SaveStatsEvery ->
> > NextSaveStats for Oct-27-16 10:32:14
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled QueueSchedule ->
> > nextQueueSchedule for Oct-27-16 09:40:49
> > Oct-27-16 09:40:49 [init] Info: (re)scheduled MaxFileAgeSchedule ->
> > nextFileAgeSchedule for Oct-27-16 09:40:49
> > Oct-27-16 09:40:49 [init] Info: last DB-backup was scheduled before 1
> hour
> > 2 mins
> > Oct-27-16 09:40:49 [init] Info: next DB-backup is scheduled in 57 mins
> > Oct-27-16 09:40:49 [init] Info: hourly scheduler is starting in 19 mins
> > Oct-27-16 09:40:49 [init] Info: 1 license registered
> > Oct-27-16 09:40:49 [init] Error: unclean shutdown of ASSP detected
> > Oct-27-16 09:40:49 [init] Saving config
> > Oct-27-16 09:40:49 [init] Info: no configuration changes detected -
> nothing
> > to save - file C:/assp/assp.cfg is unchanged
> > Oct-27-16 09:40:49 [init] Info: the DBI connection string is set to:
> > 'DBI:mysql:database=assp;host=localhost'
> > Oct-27-16 09:40:49 [init] Info: start loading Delay from
> > C:/assp/database/delaydb with approx. 128
> > Oct-27-16 09:40:49 [init] Info: Delay loaded from
> C:/assp/database/delaydb
>
> > with 0 records
> > Oct-27-16 09:40:49 [init] Info: start loading DelayWhite from
> > C:/assp/database/delaydb.white with approx. 128
> > Oct-27-16 09:40:49 [init] Info: DelayWhite loaded from
> > C:/assp/database/delaydb.white with 0 records
> > Oct-27-16 09:40:49 [init] Info: start loading LDAPlist from
> > C:/assp/database/ldaplist with approx. 128
> > Oct-27-16 09:40:49 [init] Info: LDAPlist loaded from
> > C:/assp/database/ldaplist with 0 records
> > Oct-27-16 09:40:49 [init] Starting maintenance worker thread [10000] -
> > ThreadCycleTime is set to 3000 microseconds
> > Oct-27-16 09:40:50 [Worker_10000] Info: sent DNS query for '
> > 137.16.99.209.sa.senderbase.org' type 'TXT' to nameserver
> 162.222.225.90
> ID
> > 55520
> > Oct-27-16 09:40:50 [Worker_10000] Info: sent DNS query for '
> > 137.16.99.209.sa.senderbase.org' type 'TXT' to nameserver 5.100.152.13
> ID
> > 23027
> > Oct-27-16 09:40:50 [Worker_10000] Info: sent DNS query for '
> > 137.16.99.209.sa.senderbase.org' type 'TXT' to nameserver
> 172.16.220.252
> ID
> > 36947
> > Oct-27-16 09:40:50 [Worker_10000] Info: sent DNS query for '
> > 137.16.99.209.sa.senderbase.org' type 'TXT' to nameserver
> 172.21.220.254
> ID
> > 30811
> > Oct-27-16 09:40:50 [Worker_10000] Info: got DNS DATA answer from
> nameserver
> > 162.222.225.90
> > Oct-27-16 09:40:50 [Worker_10000] Info: got valid DNS DATA answer from
> > nameserver 162.222.225.90 ID 55520
> > Oct-27-16 09:40:52 [Worker_10000] Info: switched (DNS) nameserver order
> > from 162.222.225.90 , 5.100.152.13 , 172.16.220.252 , 172.21.220.254 to
> > 172.16.220.252 , 162.222.225.90 , 172.21.220.254 , 5.100.152.13
> > Oct-27-16 09:40:54 [Worker_10000] Worker_10000 started
> > Oct-27-16 09:40:54 [init] Starting SMTP-worker-threads with
> ThreadCycleTime
> > set to 3000 microseconds
> > Oct-27-16 09:40:54 [init] Starting communication worker threads [1 to
> 10]
> > Oct-27-16 09:40:54 [Worker_10000] Info: last delta Griplist download was
> > at: Oct-27-16 09:03:13
> > Oct-27-16 09:40:54 [Worker_10000] Info: next Griplist upload is
> scheduled
> > for: Oct-28-16 08:37:52
> > Oct-27-16 09:40:54 [Worker_10000] Info: (re)scheduled GroupsReloadEvery
> ->
>
> > NextGroupsReload for Oct-27-16 10:40:54
> > Oct-27-16 09:40:54 [Worker_10000] Info: (re)scheduled POP3Interval ->
> > NextPOP3Collect for Oct-27-16 09:40:54
> > Oct-27-16 09:40:58 [Worker_1] Worker_1 started
> > Oct-27-16 09:41:03 [Worker_2] Worker_2 started
> > Oct-27-16 09:41:07 [Worker_3] Worker_3 started
> > Oct-27-16 09:41:11 [Worker_4] Worker_4 started
> > Oct-27-16 09:41:16 [Worker_5] Worker_5 started
> > Oct-27-16 09:41:19 [Worker_10000] Info: 'mysql' database connection was
> > checked in 0.018 seconds for all tables
> > Oct-27-16 09:41:20 [Worker_6] Worker_6 started
> > Oct-27-16 09:41:24 [Worker_7] Worker_7 started
> > Oct-27-16 09:41:28 [Worker_8] Worker_8 started
> > Oct-27-16 09:41:32 [Worker_9] Worker_9 started
> > Oct-27-16 09:41:36 [Worker_10] Worker_10 started
> > Oct-27-16 09:41:37 [init] Starting rebuild SpamDB worker thread [10001]
> -
> > ThreadCycleTime is set to 30 microseconds
> > Oct-27-16 09:41:41 [Worker_10001] Worker_10001 started
> > Oct-27-16 09:41:41 [Worker_10001] Info: found module C:/assp/lib/
> > rebuildspamdb.pm version 7.33
> > Oct-27-16 09:41:42 [init] All Threads are started
> > Oct-27-16 09:41:42 [init] Info: CPU priority changed for Worker_10000
> from
> > 0 to 2
> > Oct-27-16 09:41:42 [init] Info: CPU priority changed for Worker_10001
> from
> > 0 to 2
> > Oct-27-16 09:41:42 [init] Try using mysql database <assp> for selected
> > tables
> > Oct-27-16 09:41:44 [init] Info: HMMdb is using 'BerkeleyDB' version 6.0
> in
> > file C:/assp/HMMdb.bdb, because HMMusesBDB is set to ON
> > Oct-27-16 09:41:44 [init] Using table <whitelist> in mysql
> Database
> > <assp> instead of file C:/assp/database/whitelist
> > Oct-27-16 09:41:44 [init] Using table <persblack> in mysql
> Database
> > <assp> instead of file C:/assp/database/persblack
> > Oct-27-16 09:41:44 [init] Using table <redlist> in mysql
> Database
> > <assp> instead of file C:/assp/database/redlist
> > Oct-27-16 09:41:44 [init] Using table <PBWhite> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.white.db
> > Oct-27-16 09:41:44 [init] Using table <PBBlack> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.black.db
> > Oct-27-16 09:41:44 [init] Using table <RBLCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.rbl.db
> > Oct-27-16 09:41:44 [init] Using table <URIBLCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.uribl.db
> > Oct-27-16 09:41:44 [init] Using table <PTRCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.ptr.db
> > Oct-27-16 09:41:44 [init] Using table <MXACache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.mxa.db
> > Oct-27-16 09:41:44 [init] Using table <RWLCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.rwl.db
> > Oct-27-16 09:41:44 [init] Using table <SPFCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.spf.db
> > Oct-27-16 09:41:44 [init] Using table <SBCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.sb.db
> > Oct-27-16 09:41:44 [init] Using table <PBTrap> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.trap.db
> > Oct-27-16 09:41:44 [init] Using table <DKIMCache> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.dkim.db
> > Oct-27-16 09:41:44 [init] Using table <BATVTag> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.batv.db
> > Oct-27-16 09:41:44 [init] Using table <BackDNS> in mysql
> Database
> > <assp> instead of file C:/assp/database/pb/pbdb.back.db
> > Oct-27-16 09:41:44 [init] Using table <spamdb> in mysql
> Database
> > <assp> instead of file C:/assp/database/spamdb
> > Oct-27-16 09:41:44 [init] Using table <spamdbhelo> in mysql
> Database
> > <assp> instead of file C:/assp/database/spamdb.helo
> > Oct-27-16 09:41:44 [init] Using table <AdminUsers> in mysql
> Database
> > <assp> instead of file C:/assp/database/adminusers
> > Oct-27-16 09:41:44 [init] Using table <AdminUsersRight> in mysql
> Database
> > <assp> instead of file C:/assp/database/adminusers.right
> > Oct-27-16 09:41:44 [init] Start analyze spamdb
> > Oct-27-16 09:41:44 [init] Spamdb has 0 records
> > Oct-27-16 09:41:44 [init] Warning: Bayesian spam database has only 0
> records
> > Oct-27-16 09:41:44 [init] Start analyze whitelist
> > Oct-27-16 09:41:46 [init] Whitelist has 129,748 records
> > Oct-27-16 09:41:46 [init] Info: saving Stats in file asspstats.sav
> > Oct-27-16 09:41:46 [init] Info: (re)scheduled SaveStatsEvery ->
> > NextSaveStats for Oct-27-16 10:11:46
> > Oct-27-16 09:41:46 [init] Info: saving ScoreStats in file
> asspscorestats.sav
>
> > Oct-27-16 09:41:49 [init] Listening for SMTP connections on 0.0.0.0:25
> > Oct-27-16 09:41:49 [init] Listening for admin HTTP connections on
> > 0.0.0.0:55555
> > Oct-27-16 09:41:49 [init] Listening for stat HTTP connections on
> > 0.0.0.0:55553
> > Oct-27-16 09:41:49 [init] Listening for additional SMTP connections on
> > 0.0.0.0:587 , 127.0.0.1:2525
> > Oct-27-16 09:41:49 [init] Listening for SMTP relay connections on
> > 127.0.0.1:2525 , 127.0.0.1:587 , 127.0.0.1:25
> > Oct-27-16 09:41:49 [init] Info: system TCP-socket receive buffer is
> 65536
> > byte
> > Oct-27-16 09:41:49 [init] Info: system TCP-socket send buffer is 65536
> byte
> > Oct-27-16 09:41:49 [init] Info: SSL-layer receive buffer is 16384 byte
> > Oct-27-16 09:41:49 [init] Info: SSL-layer send buffer is 16384 byte
> > Oct-27-16 09:41:49 [init] Current PID: 220660
> > Oct-27-16 09:41:49 [init] Info: command queue released
> > Oct-27-16 09:41:49 [init] Info: central signalhandler - QUIT(3) -
> BREAK(21)
> > - CONT(25) - NUM10(10) - NUM17(17) - PIPE(13) - NUM18(18) - NUM12(12) -
> > STOP(23) - NUM07(7) - ABRT(22) - NUM05(5) - NUM06(6) - NUM16(16) -
> ILL(4) -
> > FPE(8) - SEGV(11) - NUM19(19) - KILL(9) - NUM24(24) - INT(2) - HUP(1) -
> > TERM(15) - CHLD(20) - CLD(26) - ALRM(14) - installed
> > Oct-27-16 09:41:49 [Main_Thread] MainThread started
> > Oct-27-16 09:41:49 [Worker_10000] Info: got command 'fillSpamfiles' from
> > command queue - 0 commands pending
> > Oct-27-16 09:41:49 [Worker_10000] Info: processing command
> 'fillSpamfiles'
>
> > from command queue
> > Oct-27-16 09:41:49 [Worker_1] Info: try to connect to server at
> > 127.0.0.1:125
> > Oct-27-16 09:41:49 [Worker_1] Info: connected to server at 127.0.0.1:125
> > Oct-27-16 09:41:49 [Worker_1] Connected: session:4E94CD54 IP:33431 >
> > 200.x.x.x:25 > 127.0.0.1:125
> >
> > On Thu, Oct 27, 2016 at 1:29 PM, cw [via Anti-Spam SMTP Proxy Server] <
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=46>>
> wrote:
> >
> >> Look further back in the logs. The last activity maybe threads cleaning
> up
>
> >> but you'll generally find earlier messages when the shut down was
> >> initiated.
> >>
> >> Search specifically for "shutdown". Failing that check your server logs
> >> for
> >> errors outside the application.
> >>
> >> On 27 Oct 2016 08:43, "vj" <[hidden email]
> >> <http:///user/SendEmail.jtp?type=node&node=41892&i=0>> wrote:
> >>
> >>> thanks.
> >>>
> >>> running assp as a window service however it keeps on stopping evry 2-3
> >> hour
> >>> without any error message in the assp logs
> >>>
> >>> - all the modules are upto date
> >>>
> >>> any suggestion ?
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> --
> >>> View this message in context: http://anti-spam-smtp-proxy-
> >>>
> server.996265.n3.nabble.com/assp-settings-new-installation-tp41860p41891.
>
> >>
> >>> html
> >>> Sent from the assp-test mailing list archive at Nabble.com.
> >>>
> >>> ------------------------------------------------------------
> >>> ------------------
> >>> The Command Line: Reinvented for Modern Developers
> >>> Did the resurgence of CLI tooling catch you by surprise?
> >>> Reconnect with the command line and become more productive.
> >>> Learn the new .NET and ASP.NET CLI. Get your free copy!
> >>> http://sdm.link/telerik
> >>> _______________________________________________
> >>> Assp-test mailing list
> >>> [hidden email] <http:///user/SendEmail.jtp?type=node&node=41892&i=1>
> >>> https://lists.sourceforge.net/lists/listinfo/assp-test
> >>>
> >>
> >>
> ------------------------------------------------------------------------------
>
>
> >>
> >> The Command Line: Reinvented for Modern Developers
> >> Did the resurgence of CLI tooling catch you by surprise?
> >> Reconnect with the command line and become more productive.
> >> Learn the new .NET and ASP.NET CLI. Get your free copy!
> >> http://sdm.link/telerik
> >> _______________________________________________
> >> Assp-test mailing list
> >> [hidden email] <http:///user/SendEmail.jtp?type=node&node=41892&i=2>
> >> https://lists.sourceforge.net/lists/listinfo/assp-test
> >>
> >>
> >> ------------------------------
> >> If you reply to this email, your message will be added to the
> discussion
> >> below:
> >>
> http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/assp-settings-new-
> >> installation-tp41860p41892.html
> >> To unsubscribe from assp settings new installation, click here
> >> <
>
> >> .
> >> NAML
> >> <
> http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/
> template/NamlServlet.jtp?macro=macro_viewer&id=instant_
> html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.
> BasicNamespace-nabble.view.web.template.NabbleNamespace-
> nabble.view.web.template.NodeNamespace&breadcrumbs=
> notify_subscribers%21nabble%3Aemail.naml-instant_emails%
> 21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml
> >
> >>
> >
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
>
>
> > The Command Line: Reinvented for Modern Developers
> > Did the resurgence of CLI tooling catch you by surprise?
> > Reconnect with the command line and become more productive.
> > Learn the new .NET and ASP.NET CLI. Get your free copy!
> > http://sdm.link/telerik
> >
> >
> >
> > _______________________________________________
> > Assp-test mailing list
> > [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=47>
> > https://lists.sourceforge.net/lists/listinfo/assp-test
> >
>
> ------------------------------------------------------------------------------
>
> The Command Line: Reinvented for Modern Developers
> Did the resurgence of CLI tooling catch you by surprise?
> Reconnect with the command line and become more productive.
> Learn the new .NET and ASP.NET CLI. Get your free copy!
> http://sdm.link/telerik
> _______________________________________________
> Assp-test mailing list
> [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=48>
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
>
>
>
>
> DISCLAIMER:
> *******************************************************
> This email and any files transmitted with it may be confidential, legally
> privileged and protected in law and are intended solely for the use of the
>
> individual to whom it is addressed.
> This email was multiple times scanned for viruses. There should be no
> known virus in this email!
> *******************************************************
>
>
> ------------------------------------------------------------------------------
>
> The Command Line: Reinvented for Modern Developers
> Did the resurgence of CLI tooling catch you by surprise?
> Reconnect with the command line and become more productive.
> Learn the new .NET and ASP.NET CLI. Get your free copy!
> http://sdm.link/telerik
> _______________________________________________
> Assp-test mailing list
> [hidden email] <http:///user/SendEmail.jtp?type=node&node=41897&i=49>
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
>
> ------------------------------
> If you reply to this email, your message will be added to the discussion
> below:
> http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/assp-settings-new-
> installation-tp41860p41897.html
> To unsubscribe from assp settings new installation, click here
> <http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=41860&code=dmFpYmhhdmphaW1hbkBnbWFpbC5jb218NDE4NjB8LTE5NzE3NzA3NzQ=>
> .
> NAML
> <http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
--
View this message in context:
http://anti-spam-smtp-proxy-server.996265.n3.nabble.com/assp-settings-new-installation-tp41860p41899.html
Sent from the assp-test mailing list archive at Nabble.com.------------------------------------------------------------------------------
The Command Line: Reinvented for Modern Developers
Did the resurgence of CLI tooling catch you by surprise?
Reconnect with the command line and become more productive.
Learn the new .NET and ASP.NET CLI. Get your free copy!
http://sdm.link/telerik
_______________________________________________
Assp-test mailing list
Assp-test@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/assp-test
