Chris Bagnall schrieb:
Getting chan_sccp from Sergio to work is really easy. The
distro contains a well documented sample config and - as I
wrote before - there are lots of info in the chan-sccp-users
mailing list archive.
Yep, I've just tried chan_sccp with the 7960 I have here and it appears to
work fine (original factory firmware, since it appears I'm going to have to
find a service contract just to download the damned updated firmware which
any sane manufacturer would provide with the product - unless anyone wants
to contact me off-list - nudge, nudge, wink, wink)
How does one go about making changes to the display on the phone? So far, my
lower soft buttons hae labels like "<P> ", and apart from the single
line I defined in sccp.conf I have an almost blank display. Is there a good
guide to where to change various bits of the display (labels and so on)?
The softbutton problem sounds like a really old firmware...
Softbuttons are controller by the channel. They have functions like DND,
newCall, EndCall, etc... The line buttons can be configured as
speeddials which can use the asterisk hint system for status monitoring.
The sample config shows how.
I also suggest, you browse the mailinglist archives at
http://lists.berlios.de/pipermail/chan-sccp-users/
Probably a stupid question, but does this thing have a backlight?
7960? Nope... 7970 has.
Regards,
Stefan
--
(o_ Stefan Gofferje | SCLT, MCP
//\ Reg'd Linux User #247167 | VCP #2263
V_/_ Heckler & Koch - the original point and click interface
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
