Hello, while testing the following scenario, I ran into trouble: One * box with two AVM active controllers in Point-to-Point-Mode is connected to another * box with ZapHFC/Quad-BRI cards using bristuff in NT-mode. All is working fine, I can call from one box to the other and vice versa.
But if I'll cut one line, it is not possible to place an outbound call from chan-capi accross the still existing line. In detail: When all lines are connected, the first two calls are placed on line 1 (which is on controller 1). The next two calls are placed on line 2 (on controller 2) If I'll cut line 2, all works as expected (I can place two calls on line 1). But if I'll cut line 1, leaving line 2 up and running, I can not place any call. The CLI tells something about "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)" and "No one is available to answer at this time (1:0/0/0)" If I do the same thing in the opposite direction (Calls are initiated from the other box with bristuff in NT-mode), all works fine. What am I doing wrong (or is this a bug)? Thanks in advance, Karsten _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users