http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087edb.html
Andrey. > We're having an issue with connecting a Cisco ITS installation to * such > that DTMF tones are passed to *. DTMF tones aren't passed to voicemail or > to any of the interfaces behind *. > > On the Cisco Side: > > dial-peer voice 8 voip > destination-pattern 9999$ > session protocol sipv2 > session target ipv4:172.16.1.249 > session transport udp > dtmf-relay rtp-nte > codec g711ulaw > no vad > > We have also tried using rtp payload-type nte to adjust the nte port value > to 101 versus 100. SIP Notify doesn't work, cisco-rtp doesn't work. I > have tried every possible dtmfmode= option [inband, rfc2833, or info] > within this SIP device. Toggling session transport udp, no vad, and the > codecs seem to be no use. I'm frustrated and puzzled. If anyone can > provide some guidance, I'd be very grateful! We're trying to get this up > and running this morning. > > Josh _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users