Can you post your zaptel.conf so we can verify your timing settings? --- Matthew Fredrickson Software Engineer Digium, Inc.
On Jun 25, 2007, at 11:10 PM, Don Kelly wrote: > I've tried timing faxes two ways: > > From a fax machine on a station port of an AltiGen PC/PBX served by > an MCI > PRI calling back into the same PRI and reaching a RightFax server on a > station port behind the AltiGen. > > From the same fax machine on the same station port of the AltiGen > PC/PBX > served by the same MCI PRI calling a number on an XO PRI connected > to an > Asterisk system (Digium TE410P), dialing out on another channel on > the same > PRI back into the MCI PRI and reaching the RightFax server on the > station > port behind the AltiGen. > > extensions.conf includes: > exten => 6122353002,1,dial(zap/g1/6122590773) > > Sending a one-page fax with moderate density (no graphics) takes > almost five > minutes longer going through the Asterisk server. > > Any suggestions? > > --Don > > Don Kelly > PCF Corp > Real Support for your Virtual Office > 651 842-1000 > 888 Don Kell(y) > 651 842-1001 fax > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users