Matt (& All), Thanks for the info below. You obviously responded to my bug report too (thanks again) - so I'll keep my dialog on the list to benefit other users too.
>From your response below and on the bug site, I'm starting to get the picture. I know the firmware on the Nortel is old, so I'm guessing that libpri is sending something that the Nortel does not know how to handle. Is there a way to dumb down what libpri sends? From everything I've read PRI is an evolving standard - and older devices may struggle with newer extensions/developments. (This might be very handy for users trying to talk to old pbx's.) Is there a workaround? Thanks, Michelle > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Matthew Fredrickson > Sent: Thursday, November 01, 2007 1:06 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] PRI over T1 calls dropping, cause 100 > > Michelle Dupuis wrote: > > I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a > > Meridian Option 61C. Calls either way drop with error > "Channel 0/23, span 1 got > > hangup, cause 100". Can anyone offer insight into the cause and > > solution/workaround? (I tried upgrading to Ast 1.4.13, and > upgrading > > matching zaptel & libpri, put the problem is identical). > > > > For testing, I tried a call from the Meridian to an extension which > > just plays the monkey sounds. The call sets up, but I never hear > > monkeys (just a busy tone) as the call disconnects immediately. > > > > I have three attachments below: > > 1. The CLI output showing a dropped call (inbound from > Meridian1) 2. A > > PRI DEBUG of the same call, showing "!! Invalid Protocol > Profile field > > 0x11" in the trace. > > 3. A PRI INTENSE DEBUG SPAN 1 of the same call. (I tried > upgrading to > > Ast > > 1.4.13 prior to this call trace - same result) > > > > From what I can see in the trace, a Q.932 Interpretation > component is > > not handled. > > So....what do I do? > > The Q.932 part of that and invalid protocol profile field > shouldn't be your problem. It looks like the switch is > rejecting it for this reason: > > < Protocol Discriminator: Q.931 (8) len=8 < Call Ref: len= 1 > (reference 23/0x17) (Originator) < Message type: RELEASE (77) > < [08 02 81 e4] > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Private network serving the local user (1) > < Ext: 1 Cause: Invalid information element contents > (100), class = Protocol Error (6) ] > > > Invalid information element contents. You need to figure out > what the switch doesn't seem to be liking. Looks like it > doesn't like the way one of the IEs is coded. > > Matthew Fredrickson > > > > > Thanks, > > MD > > > > =1=================================================== > > > > !! Invalid Protocol Profile field 0x11 > > -- Accepting call from '2004000' to '111' on channel > 0/23, span 1 > > -- Executing NoOp("Zap/23-1", "Incoming call from > Meridian1") in > > new stack > > -- Executing NoOp("Zap/23-1", " From number: 2004000| > revised to > > 2004") in new stack > > -- Executing Set("Zap/23-1", "CALLERID(num)=2004") in new stack > > -- Executing NoOp("Zap/23-1", " From name: TELEPHONE ROOM") in > > new stack > > -- Executing Macro("Zap/23-1", "dialfromMeridian|111") > in new stack > > -- Executing NoOp("Zap/23-1", "Incoming call to number > 111| which > > maps to device: ") in new stack > > -- Executing GotoIf("Zap/23-1", "1?NoMatch") in new stack > > -- Goto (macro-dialfromMeridian,s,5) > > -- Executing NoOp("Zap/23-1", "Invalid extension in macro > > dialfromMeridian") in new stack > > -- Executing Hangup("Zap/23-1", "") in new stack > > == Spawn extension (macro-dialfromMeridian, s, 6) exited > non-zero on > > 'Zap/23-1' in macro 'dialfromMeridian' > > == Spawn extension (macro-dialfromMeridian, s, 6) exited > non-zero on > > 'Zap/23-1' > > -- Hungup 'Zap/23-1' > > !! Invalid Protocol Profile field 0x11 > > -- Accepting call from '2004000' to '123' on channel > 0/23, span 1 > > -- Executing Answer("Zap/23-1", "") in new stack > > -- Executing Playback("Zap/23-1", "tt-monkeys") in new stack > > -- Playing 'tt-monkeys' (language 'en') > > -- Channel 0/23, span 1 got hangup, cause 100 > > == Spawn extension (entryocgexternal, 123, 2) exited non-zero on > > 'Zap/23-1' > > -- Hungup 'Zap/23-1' > > > > =2=================================================== > > *CLI> pri debug span 1 > > Enabled debugging on span 1 > > < Protocol Discriminator: Q.931 (8) len=61 < Call Ref: len= 1 > > (reference 23/0x17) (Originator) < Message type: SETUP (5) > < [04 03 80 > > 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info > > transfer > > capability: Speech (0) > > < Ext: 1 Trans mode/rate: > 64kbps, circuit-mode > > (16) > > < Ext: 1 User information > layer 1: u-Law (34) > > < [18 04 e9 80 83 17] > > < Channel ID (len= 6) [ Ext: 1 IntID: Explicit, PRI Spare: 0, > > Exclusive > > Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 DS1 Identifier: 0 > > < Ext: 1 Coding: 0 Number > Specified Channel Type: > > 3 > > < Ext: 0 Channel: 23 ] > > < [1c 0a 11 be a1 06 02 01 01 02 01 01] < Facility (len=12, > codeset=0) > > [ 0x11, 0xbe, 0xa1, 0x06, 0x02, 0x01, 0x01, 0x02, 0x01, > 0x01 ] < [28 > > 0f b1 54 45 4c 45 50 48 4f 4e 45 20 52 4f 4f 4d] < Display (len=15) > > Charset: 31 [ TELEPHONE ROOM ] < [6c 09 09 80 32 30 30 34 > 30 30 30] < > > Calling Number (len=11) [ Ext: 0 TON: Unknown Number Type (0) NPI: > > Private Numbering Plan (9) > > < Presentation: Presentation > permitted, user > > number not screened (0) '2004000' ] > > < [70 04 89 31 32 33] > > < Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type > (0) NPI: > > Private Numbering Plan (9) '123' ] > > -- Making new call for cr 23 > > -- Processing Q.931 Call Setup > > -- Processing IE 4 (cs0, Bearer Capability) > > -- Processing IE 24 (cs0, Channel Identification) > > -- Processing IE 28 (cs0, Facility) > > !! Invalid Protocol Profile field 0x11 > > -- Processing IE 40 (cs0, Display) > > -- Processing IE 108 (cs0, Calling Party Number) > > -- Processing IE 112 (cs0, Called Party Number) > >> Protocol Discriminator: Q.931 (8) len=10 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: CALL PROCEEDING (2) > >> [18 03 a9 83 97] > >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > >> Exclusive > > Dchan: 0 > >> ChanSel: Reserved > >> Ext: 1 Coding: 0 Number Specified > Channel Type: > > 3 > >> Ext: 1 Channel: 23 ] > > -- Accepting call from '2004000' to '123' on channel > 0/23, span 1 > > -- Executing Answer("Zap/23-1", "") in new stack > >> Protocol Discriminator: Q.931 (8) len=10 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: CONNECT (7) > >> [18 03 a9 83 97] > >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > >> Exclusive > > Dchan: 0 > >> ChanSel: Reserved > >> Ext: 1 Coding: 0 Number Specified > Channel Type: > > 3 > >> Ext: 1 Channel: 23 ] > > -- Executing Playback("Zap/23-1", "tt-monkeys") in new stack > > -- Playing 'tt-monkeys' (language 'en') < Protocol > Discriminator: > > Q.931 (8) len=8 < Call Ref: len= 1 (reference 23/0x17) > (Originator) < > > Message type: RELEASE (77) < [08 02 81 e4] > > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > > Private network serving the local user (1) > > < Ext: 1 Cause: Invalid information > element contents > > (100), class = Protocol Error (6) ] > > -- Processing IE 8 (cs0, Cause) > > -- Channel 0/23, span 1 got hangup, cause 100 > > == Spawn extension (entryocgexternal, 123, 2) exited non-zero on > > 'Zap/23-1' > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate > > Release Request > >> Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: RELEASE COMPLETE (90) > >> [08 02 81 90] > >> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > > Private network serving the local user (1) > >> Ext: 1 Cause: Normal Clearing (16), > class = Normal > >> Event > > (1) ] > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > -- Hungup 'Zap/23-1' > > < Protocol Discriminator: Q.931 (8) len=8 < Call Ref: len= 1 > > (reference 23/0x17) (Originator) < Message type: RELEASE > (77) < [08 02 > > 81 e4] > > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > > Private network serving the local user (1) > > < Ext: 1 Cause: Invalid information > element contents > > (100), class = Protocol Error (6) ] > > -- Making new call for cr 23 > > -- Processing IE 8 (cs0, Cause) > >> Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: RELEASE COMPLETE (90) > >> [08 02 81 d1] > >> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > > Private network serving the local user (1) > >> Ext: 1 Cause: Invalid call reference value (81), > >> class = > > Invalid message (5) ] > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > > > > > =3======================================================== > > > > T203 counter expired, sending RR and scheduling T203 again Sending > > Receiver Ready (3) > > > >> [ 02 01 01 07 ] > > > >> Supervisory frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > >> N(R): 003 P/F: 1 > >> 0 bytes of data > > -- Restarting T203 counter > > > > < [ 02 01 01 0b ] > > > > < Supervisory frame: > > < SAPI: 00 C/R: 1 EA: 0 > > < TEI: 000 EA: 1 > > < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > > < N(R): 005 P/F: 1 > > < 0 bytes of data > > -- ACKing all packets from 4 to (but not including) 5 > > -- Since there was nothing left, stopping T200 counter > > -- Stopping T203 counter since we got an ACK > > -- Nothing left, starting T203 counter > > -- Got RR response to our frame > > -- Restarting T203 counter > > > > < [ 00 01 06 0a 08 01 17 05 04 03 80 90 a2 18 04 e9 80 83 > 17 1c 0a 11 > > be a1 > > 06 02 01 01 02 01 01 6c 09 09 80 32 30 30 35 30 30 30 70 04 > 89 31 32 > > 33 ] > > > > < Informational frame: > > < SAPI: 00 C/R: 0 EA: 0 > > < TEI: 000 EA: 1 > > < N(S): 003 0: 0 > > < N(R): 005 P: 0 > > < 44 bytes of data > > -- ACKing all packets from 4 to (but not including) 5 > > -- Since there was nothing left, stopping T200 counter > > -- Stopping T203 counter since we got an ACK > > -- Nothing left, starting T203 counter < Protocol > Discriminator: Q.931 > > (8) len=44 < Call Ref: len= 1 (reference 23/0x17) (Originator) < > > Message type: SETUP (5) < [04 03 80 90 a2] < Bearer > Capability (len= > > 5) [ Ext: 1 Q.931 Std: 0 Info transfer > > capability: Speech (0) > > < Ext: 1 Trans mode/rate: > 64kbps, circuit-mode > > (16) > > < Ext: 1 User information > layer 1: u-Law (34) > > < [18 04 e9 80 83 17] > > < Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0 > > Exclusive > > Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 DS1 Identifier: 0 > > < Ext: 1 Coding: 0 Number Specified > Channel Type: 3 > > < Ext: 0 Channel: 23 ] > > < [1c 0a 11 be a1 06 02 01 01 02 01 01] < Facility (len=12, > codeset=0) > > [ 0x11, 0xBE, 0xA1, 0x06, 0x02, 0x01, 0x01, 0x02, 0x01, 0x01 ] > > PROTOCOL 11 > > A1 0006 (CONTEXT SPECIFIC [1]) > > 02 0001 01 (INTEGER: 1) > > 02 0001 01 (INTEGER: 1) > > < [6c 09 09 80 32 30 30 35 30 30 30] > > < Calling Number (len=11) [ Ext: 0 TON: Unknown Number > Type (0) NPI: > > Private Numbering Plan (9) > > < Presentation: Presentation > permitted, user > > number not screened (0) '2005000' ] > > < [70 04 89 31 32 33] > > < Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type > (0) NPI: > > Private Numbering Plan (9) '123' ] > > -- Making new call for cr 23 > > -- Processing Q.931 Call Setup > > -- Processing IE 4 (cs0, Bearer Capability) > > -- Processing IE 24 (cs0, Channel Identification) > > -- Processing IE 28 (cs0, Facility) > > Handle Q.932 ROSE Invoke component > > -- Processing IE 108 (cs0, Calling Party Number) > > -- Processing IE 112 (cs0, Called Party Number) > > q931.c:3296 q931_receive: call 23 on channel 23 enters state 6 (Call > > Present) > > Sending Receiver Ready (4) > > > >> [ 00 01 01 08 ] > > > >> Supervisory frame: > >> SAPI: 00 C/R: 0 EA: 0 > >> TEI: 000 EA: 1 > >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > >> N(R): 004 P/F: 0 > >> 0 bytes of data > > -- Restarting T203 counter > > -- Restarting T203 counter > > q931.c:2570 q931_call_proceeding: call 23 on channel 23 > enters state 9 > > (Incoming Call Proceeding) > > > >> [ 02 01 0a 08 08 02 80 17 02 18 03 a9 83 97 ] > > > >> Informational frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> N(S): 005 0: 0 > >> N(R): 004 P: 0 > >> 10 bytes of data > > -- Restarting T203 counter > > Stopping T_203 timer > > Starting T_200 timer > >> Protocol Discriminator: Q.931 (8) len=10 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: CALL PROCEEDING (2) > >> [18 03 a9 83 97] > >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > >> Exclusive > > Dchan: 0 > >> ChanSel: Reserved > >> Ext: 1 Coding: 0 Number Specified > Channel Type: 3 > >> Ext: 1 Channel: 23 ] > > -- Accepting call from '2005000' to '123' on channel > 0/23, span 1 > > -- Executing [EMAIL PROTECTED]:1] Answer("Zap/23-1", "") in > > new stack > > q931.c:2697 q931_connect: call 23 on channel 23 enters state 10 > > (Active) > > > >> [ 02 01 0c 08 08 02 80 17 07 18 03 a9 83 97 ] > > > >> Informational frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> N(S): 006 0: 0 > >> N(R): 004 P: 0 > >> 10 bytes of data > > T_200 timer already going (2) > >> Protocol Discriminator: Q.931 (8) len=10 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: CONNECT (7) > >> [18 03 a9 83 97] > >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > >> Exclusive > > Dchan: 0 > >> ChanSel: Reserved > >> Ext: 1 Coding: 0 Number Specified > Channel Type: 3 > >> Ext: 1 Channel: 23 ] > > -- Executing [EMAIL PROTECTED]:2] Playback("Zap/23-1", > > "tt-monkeys") in new stack > > -- <Zap/23-1> Playing 'tt-monkeys' (language 'en') > > > > < [ 00 01 08 0e 08 01 17 4d 08 02 81 e4 ] > > > > < Informational frame: > > < SAPI: 00 C/R: 0 EA: 0 > > < TEI: 000 EA: 1 > > < N(S): 004 0: 0 > > < N(R): 007 P: 0 > > < 8 bytes of data > > -- ACKing all packets from 4 to (but not including) 7 > > -- ACKing packet 5, new txqueue is 6 (-1 means empty) > > -- ACKing packet 6, new txqueue is -1 (-1 means empty) > > -- Since there was nothing left, stopping T200 counter > > -- Nothing left, starting T203 counter < Protocol > Discriminator: Q.931 > > (8) len=8 < Call Ref: len= 1 (reference 23/0x17) (Originator) < > > Message type: RELEASE (77) < [08 02 81 e4] < Cause (len= 4) > [ Ext: 1 > > Coding: CCITT (ITU) standard (0) Spare: 0 > > Location: Private network serving the local user (1) > > < Ext: 1 Cause: Invalid information > element contents > > (100), class = Protocol Error (e.g. unknown message) (6) ] > > -- Processing IE 8 (cs0, Cause) > > q931.c:3536 q931_receive: call 23 on channel 23 enters > state 0 (Null) > > Sending Receiver Ready (5) > > > >> [ 00 01 01 0a ] > > > >> Supervisory frame: > >> SAPI: 00 C/R: 0 EA: 0 > >> TEI: 000 EA: 1 > >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > >> N(R): 005 P/F: 0 > >> 0 bytes of data > > -- Restarting T203 counter > > -- Restarting T203 counter > > -- Channel 0/23, span 1 got hangup, cause 100 > > == Spawn extension (entryocgexternal, 123, 2) exited non-zero on > > 'Zap/23-1' > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate > > Release Request > > > >> [ 02 01 0e 0a 08 02 80 17 5a 08 02 81 90 ] > > > >> Informational frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> N(S): 007 0: 0 > >> N(R): 005 P: 0 > >> 9 bytes of data > > -- Restarting T203 counter > > Stopping T_203 timer > > Starting T_200 timer > >> Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: RELEASE COMPLETE (90) > >> [08 02 81 90] > >> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > > Location: Private network serving the local user (1) > >> Ext: 1 Cause: Normal Clearing (16), > class = Normal > >> Event > > (1) ] > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > -- Hungup 'Zap/23-1' > > > > < [ 00 01 0a 0e 08 01 17 4d 08 02 81 e4 ] > > > > < Informational frame: > > < SAPI: 00 C/R: 0 EA: 0 > > < TEI: 000 EA: 1 > > < N(S): 005 0: 0 > > < N(R): 007 P: 0 > > < 8 bytes of data > > -- ACKing all packets from 6 to (but not including) 7 > > -- Something left to transmit (7), restarting T200 counter > < Protocol > > Discriminator: Q.931 (8) len=8 < Call Ref: len= 1 > (reference 23/0x17) > > (Originator) < Message type: RELEASE (77) < [08 02 81 e4] < Cause > > (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > > Location: Private network serving the local user (1) > > < Ext: 1 Cause: Invalid information > element contents > > (100), class = Protocol Error (e.g. unknown message) (6) ] > > -- Making new call for cr 23 > > -- Processing IE 8 (cs0, Cause) > > > >> [ 02 01 10 0c 08 02 80 17 5a 08 02 81 d1 ] > > > >> Informational frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> N(S): 008 0: 0 > >> N(R): 006 P: 0 > >> 9 bytes of data > > T_200 timer already going (2) > >> Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > >> 23/0x17) (Terminator) Message type: RELEASE COMPLETE (90) > >> [08 02 81 d1] > >> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > > Location: Private network serving the local user (1) > >> Ext: 1 Cause: Invalid call reference value (81), > >> class = > > Invalid message (e.g. parameter out of range) (5) ] > NEW_HANGUP DEBUG: > > Calling q931_hangup, ourstate Null, peerstate Null > NEW_HANGUP DEBUG: > > Destroying the call, ourstate Null, peerstate Null > > > > < [ 02 01 01 12 ] > > > > < Supervisory frame: > > < SAPI: 00 C/R: 1 EA: 0 > > < TEI: 000 EA: 1 > > < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > > < N(R): 009 P/F: 0 > > < 0 bytes of data > > -- ACKing all packets from 6 to (but not including) 9 > > -- ACKing packet 7, new txqueue is 8 (-1 means empty) > > -- ACKing packet 8, new txqueue is -1 (-1 means empty) > > -- Since there was nothing left, stopping T200 counter > > -- Nothing left, starting T203 counter > > -- Restarting T203 counter > > T203 counter expired, sending RR and scheduling T203 again Sending > > Receiver Ready (6) > > > >> [ 02 01 01 0d ] > > > >> Supervisory frame: > >> SAPI: 00 C/R: 1 EA: 0 > >> TEI: 000 EA: 1 > >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > >> N(R): 006 P/F: 1 > >> 0 bytes of data > > -- Restarting T203 counter > > > > < [ 02 01 01 13 ] > > > > < Supervisory frame: > > < SAPI: 00 C/R: 1 EA: 0 > > < TEI: 000 EA: 1 > > < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > > < N(R): 009 P/F: 1 > > < 0 bytes of data > > -- ACKing all packets from 8 to (but not including) 9 > > -- Since there was nothing left, stopping T200 counter > > -- Stopping T203 counter since we got an ACK > > -- Nothing left, starting T203 counter > > -- Got RR response to our frame > > -- Restarting T203 counter > > > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > Matthew Fredrickson > Software/Firmware Engineer > Digium, Inc. > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users