2010/4/29 garge rama <garge.r...@gmail.com> > > > Hi, > > > > I am new to asterisk and trying to make calls with TDM400P asterisk digium > card. > > > > I am using asterisk-1.6.2.4, dahdi-linux-complete-2.3.0+2.3.0 and > libpri-1.4.10.2 packages which are downloaded from asterisk website ( > www.asterisk.org) > > and able to compile successfully. TDM400P Digium card (having only one FXS > connected to J4) has installed successfully in PC. > > > > I would like to make calls across SIP [x-lite] to analog phone connected to > TDM400P Digium card (fxs-j4). > > For this the following four conf files are modified as shown below. > > > > * chan_dahdi.conf* > > *==============* > > [channels] > > context=test > > usecallerid=yes > > hidecallerid=no > > immediate=no > > > > signaling=fxo_ks > > echocancel=yes > > group=1 > > channel=1 > > > > *extensions.conf*** > > *=============* > > [my-phones] ------------------->*EXTEN 3333 does not exists for your sip > peer context* > > exten => 2000,1,Dial(SIP/2000) > > ; Should look like: > *exten => 3333,1,Asterisk_Application(Action)* ;Dial(Zap/1/${Phone_Number_you want})
> [test] > > exten => 3333,1,Dial(Zap/1) > > exten => 3333,2,HangUp() > > > > *sip.conf*** > > *=======* > > [general] > > port = 5060 > > bindaddr = 0.0.0.0 > > context = others > > > > [2000] > > type=friend > > *context=**my-phones * > > secret=1234 > > host=dynamic > > > > *system.conf* > > *==========* > > fxoks=1 > > loadzone = be > > defaultzone = be > > > > With those changes x-lite getting registered with asterisk and analog > device/phone is getting ring tone with off-hook and also getting debug > prints on cli, but not able to make calls. > > > > Test Setup: > > ======== > > X-lite [configured as 2000, password… other info] running on asterisk PC > à registered with asterisk. > > Analog phone connected to TDM400P Digium card - FXS-J4 running on same > asterisk PC à getting ring tone > > > > Test Result: > > ========= > > Tried by calling 3333 from x-lite à getting message on CLI “call from > ‘2000’ to ‘3333’ rejected because extension not found” > > Tried by calling 2000 from analog phone [Digium-FXS-J4] -> getting some > engage/disconnected tone while pressing digts [2000] on phone itself. > > > > Welcome for your valuable suggestions and comments. Thank You in advance. > > > > Regards, > > Garge. > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Juan. Linux User #441131
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users