On Sat, Jun 19, 2010 at 12:00 PM, James Lamanna <jlama...@gmail.com> wrote: > On Fri, Jun 18, 2010 at 10:51 PM, Stefan Schmidt <s...@sil.at> wrote: >> James Lamanna schrieb: >>> It appears as though the 489 Bad Event response to the NAT keep alive >>> event responds to the local address, instead of responding to the >>> NATted address. >>> This causes Linksys phones to go amber (no registration) after a short >>> amount of time after placing calls. >>> Turning the Linksys NAT keep alive off is a workound, but non-ideal in >>> may situations. >>> >>> Apparently the asterisk devs don't even think this is a bug: >>> https://issues.asterisk.org/view.php?id=17532 >>> >>> Has anyone dealt with this at all? >>> >>> Thanks. >>> >>> -- James >>> >> Hello james, >> >> in the SPA config webpage on EXT 1 in the Nat Keep Alive MSG you should >> set $OPTIONS instead of $NOTIFY. >> >> then in your asterisk extension default context just set this: >> >> exten => s,1,Hangup >> >> then the phone will send a options packet and you will get a 200 OK >> instead of 489 Bad event. >> >> this should help. >> >> best regards > > Thanks Steve, > I'll give that a try. > I think I'll also look into why responses to NOTIFYs don't do the > right thing in terms of NAT either. > >> >> steve > > -- James >
I have created an issue report on this a few weeks on with Asterisk 1.6.2.8-rc1. This was happening on a client site, which I didn't have a chance to stop back by, so they closed the issue. https://issues.asterisk.org/bug_view_page.php?bug_id=17379 It looked to me like Asterisk was rejecting the NOTIFY message due to no callid, which is in the message. I couldn't figure out what was going and there is code in 1.6.2.x to return a 200 OK to a NOTIFY message. Ryan -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users