This doesn't represent the 2nd span? span=2,1,0,esf,b8zs bchan=25-47 dchan=48
Dean On Mon, Feb 21, 2011 at 1:18 PM, Juan David Diaz <juanch...@gmail.com> wrote: > I don't see any problem...... but, i don't see the 2nd SPAN @ zaptel: > yellow alarm on span 2 > > regards. > > > Juan. > Linux User #441131 > > > On Mon, Feb 21, 2011 at 2:11 PM, Dean Hoover <kb7...@gmail.com> wrote: >> >> Here you go: >> >> /etc/zaptel.conf: >> loadzone = us >> defaultzone=us >> >> span=1,0,0,esf,b8zs >> bchan=1-23 >> dchan=24 >> span=2,1,0,esf,b8zs >> bchan=25-47 >> dchan=48 >> >> #Added 2nd 2xT1 card >> span=3,0,0,d4,ami >> e&m=49-72 >> span=4,0,0,d4,ami >> fxoks=73-96 >> >> --------------------------------------- >> >> /etc/asterisk/zapata.conf: >> [channels] >> group=1 >> context=default >> signalling=pri_cpe >> switchtype=qsig >> channel=>1-23 >> >> group=2 >> context=twtelecom-in >> signalling=pri_cpe >> switchtype=5ess >> echocancel=yes >> channel=>25-47 >> >> group=3 >> context=definity-in >> signalling=em_w >> channel=>49-72 >> >> group=10 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>73 >> >> group=11 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>74 >> >> group=12 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>75 >> >> group=13 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>76 >> >> group=14 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>77 >> >> group=15 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>78 >> >> group=16 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>79 >> >> group=17 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>80 >> >> group=18 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>81 >> >> group=19 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>82 >> >> group=20 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>83 >> >> group=21 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>84 >> >> group=22 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>85 >> >> group=23 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>86 >> >> group=24 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>87 >> >> group=25 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>88 >> >> group=26 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>89 >> >> group=27 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>90 >> >> group=28 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>91 >> >> group=29 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>92 >> >> group=30 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>93 >> >> group=31 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>94 >> >> group=32 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>95 >> >> group=33 >> context=testivr-in >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> channel=>96 >> >> --------------------------- >> >> On Mon, Feb 21, 2011 at 12:58 PM, Juan David Diaz <juanch...@gmail.com> >> wrote: >> > Dean, >> > what's your zaptel & Zapata config_ >> > regards >> > Juan. >> > Linux User #441131 >> > >> > >> > On Mon, Feb 21, 2011 at 1:44 PM, Dean Hoover <kb7...@gmail.com> wrote: >> >> >> >> We are running Asterisk version 1.4.23-1, libpri-1.4.9 and >> >> zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10. >> >> >> >> We have a T1 PRI connected to the telco. Over the last 4-5 days, we >> >> have getting Yellow/Red alarms coming from the T1 PRI. The other two >> >> ports in use are connected to internal test switches (Avaya >> >> Legend/Avaya Definity), and are not showing any errors. >> >> >> >> /var/log/asterisk/messages reports: >> >> [Feb 21 12:21:56] NOTICE[4795] chan_dahdi.c: PRI got event: Alarm (4) >> >> on Primary D-channel of span 2 >> >> [Feb 21 12:21:56] DEBUG[4795] chan_dahdi.c: Got event Alarm (4) on >> >> D-channel for span 2 >> >> >> >> /var/log/syslog reports: >> >> Feb 21 12:21:56 asterisk kernel: [509981.796536] wct2xxp: Setting >> >> yellow alarm on span 2 >> >> Feb 21 12:21:56 asterisk kernel: [509981.796562] timing source auto >> >> card >> >> 0! >> >> Feb 21 12:21:56 asterisk kernel: [509981.813535] timing source auto >> >> card >> >> 0! >> >> Feb 21 12:22:01 asterisk kernel: [509986.813869] wct2xxp: Clearing >> >> yellow alarm on span 2 >> >> >> >> Intensive PRI debugging does not show any errors prior to the alarm. >> >> >> >> The other part to this is for a while it was pretty intermittent. One >> >> day we would get it 2 times, another 8-12 times. Today, however, it >> >> seems to be happening around every 11-13 minutes. Before this >> >> started, there were no errors for the 6 days prior. >> >> >> >> The first response from the telco 4 days ago said that it was an issue >> >> on their T3, then came back saying we were sending something to reset >> >> the circuit, but I interpret "PRI got event" as meaning we received >> >> something from them. >> >> >> >> They put a COM tracer in our building, on that circuit, since Friday >> >> afternoon. They took it with them to examine the results this >> >> morning, and are supposed to call me when they know something. >> >> >> >> While they are doing that, I want to make sure that I have all the >> >> information I need in order to diagnose it. I haven't found a way to >> >> trace the actual B8ZS/ESF frames, and was wondering if there was a way >> >> for me to log those events. It's not that I don't trust them, but by >> >> the same token I haven't changed anything on my end, the other port on >> >> the Digium card isn't reporting an issue, and a complete shutdown of >> >> the Asterisk server didn't change the results. >> >> >> >> Any advice would be greatly appreciated. >> >> >> >> Dean Hoover >> >> Milwaukee, Wisconsin >> >> >> >> -- >> >> _____________________________________________________________________ >> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> >> http://www.asterisk.org/hello >> >> >> >> asterisk-users mailing list >> >> To UNSUBSCRIBE or update options visit: >> >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > >> > >> > -- >> > _____________________________________________________________________ >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> > New to Asterisk? Join us for a live introductory webinar every Thurs: >> > http://www.asterisk.org/hello >> > >> > asterisk-users mailing list >> > To UNSUBSCRIBE or update options visit: >> > http://lists.digium.com/mailman/listinfo/asterisk-users >> > >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users