How/Where would I do that? TIA CF
On Mon, Feb 21, 2011 at 11:23 PM, Shaun Ruffell <sruff...@digium.com> wrote: > On 2/21/11 4:46 PM, C F wrote: >> >> I just installed an FXS module onto a 4 channel tdm thats about 5 >> years old and it wont work. Running dmesg I can see the following >> error: >> >> Zapata Telephony Interface Registered on major 196 >> Freshmaker version: 71 >> Freshmaker passed register test >> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 >> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 >> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 >> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 >> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 >> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 >> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 >> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 >> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 >> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C >> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 >> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 >> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 >> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 >> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 >> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 >> !!!!! Init Indirect Registers UNSUCCESSFULLY. >> Indirect Registers failed verification. >> !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 >> !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 >> !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 >> !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 >> !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 >> !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 >> !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 >> !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 >> !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 >> !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C >> !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 >> !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 >> !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 >> !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 >> !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 >> !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 >> !!!!! Init Indirect Registers UNSUCCESSFULLY. >> Indirect Registers failed verification. >> Module 0: FAILED FXS (FCC) >> Module 1: Installed -- AUTO FXO (FCC mode) >> Module 2: Installed -- AUTO FXO (FCC mode) >> Module 3: Installed -- AUTO FXO (FCC mode) >> Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules) >> >> Does this have to do with the fact that the module is way newer than the >> card? >> > > Not having much direct experience with the wctdm.c driver, that would be my > guess. You might be able to edit the wctdm_proslic_insane() function to > force the FLAG_3215 on for the card and see if that gives you a different > result. > > -- > Shaun Ruffell > Digium, Inc. | Linux Kernel Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at: www.digium.com & www.asterisk.org > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users