Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot).
It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came on green for the installed FXO modules. On the new server, the Zaptel drivers wouldn't build so I switched over to dahdi. Everything seems to be working, EXCEPT there are no lights on the TDM410P! I guess I can ignore that the lights aren't lit up, because it seems to be functioning as expected (I can dial out and receive incoming calls)...but it's disconcerting that the lights aren't on. Yes, the Molex power connector is connected (although I think that's only needed by FXS modules). I've tried google searches but haven't found anything mentioning this odd behavior. Is this expected? Many thanks, ~Brian Henning ------------------------------------------------------ Brian Henning, Software Engineer /\ Pine Research Instrumentation //\\ 5908 Triangle Drive ///\\\ Raleigh, NC 27617 ////\\\\ USA || || phone: 919.782.8320 fax: 919.782.8323 email: bhenn...@pineinst.com ------------------------------------------------------ -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users