Kevin wrote: > On 03/21/2011 06:49 PM, Dan Austin wrote: >> I just finished a fresh install of 1.8.3.2 at home using the packages >> Digium hosts. >> >> After correcting a number of typo/config'o error that had crept in >> over the years, I thought I had everything working. >> >> My wife just complained that she cannot call her mother (who is using an >> old IAX hardphone I left for her). >> > After turning up the logging level I see- >> chan_iax2.c: Call rejected, CallToken Support required >> >> Which google cays can be fixed with: >> [general] >> calltokenoptional=0.0.0.0/0.0.0.0 >> maxcallnumbers=16384 >> >> or >> [peer] >> requirecalltoken=no (or auto) >> >> Either set of changes does suppress the error, but the remote device still >> fails to register. No other errors/warnings are present.
> If there aren't any errors or warnings appearing, then you must not have > the logging verbosity set high enough. Ensure that you've used 'core set > verbose 10' and 'core set debug 10', and that your 'console' channel in > logger.conf has all the logger levels enabled. If you still don't see > what you are looking for, use 'iax2 set debug' to enable IAX2-specific > debugging for that phone's IP address. I should have said relevant errors/warnings. I see info about devastate and queues, but little else. That said I think the problem is unrelated to call token and an issue with the NAT firewall at my mother-in-laws. The incoming traffic is on a very high port and not 4569. I interpret the following log as her phone is not receiving the replies- Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00003ms SCall: 14807 DCall: 00000 [120.xxx.xxx.12:22686] USERNAME : XXXXXXX REFRESH : 60 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGAUTH Timestamp: 00013ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] AUTHMETHODS : 3 CHALLENGE : \x34\x36\x37\x38\x33\x35\x33\x33 USERNAME : XXXXXXX Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00003ms SCall: 14807 DCall: 00000 [120.xxx.xxx.12:22686] USERNAME : XXXXXXX REFRESH : 60 Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00003ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGAUTH Timestamp: 00013ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] AUTHMETHODS : 3 CHALLENGE : \x34\x36\x37\x38\x33\x35\x33\x33 USERNAME : XXXXXXX Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00003ms SCall: 14807 DCall: 00000 [120.xxx.xxx.12:22686] USERNAME : XXXXXXX REFRESH : 60 Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00003ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00003ms SCall: 14807 DCall: 00000 [120.xxx.xxx.12:22686] USERNAME : XXXXXXX REFRESH : 60 Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00003ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: LAGRQ Timestamp: 10015ms SCall: 03287 DCall: 14807 [120.xxx.xxx.12:22686] I've asked my wife to have her mother reboot her router and phone, but that has not happened yet. Dan -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users