Hi randall, Am Mittwoch, den 01.06.2011, 10:00 +0200 schrieb randall: > > > i get the following errors: > > > pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel > > > of span 2 > > > > > > > > > Your telco provider has crc on or off , that is not matching with > > > your server cross check with them. > > > and this problem solve 4 problems > > > > > > > > thanks for the reply, > > > > what is crc (same as crc-4?) > > and where can i set this? > > > > same crc or crc4 > > > > -- > adding crc as follows, span=1,1,0,ccs,ami,crc, causes DAHDI to not load > at all
As I can see from Your first post, You are using BRI in point-to-multipoint mode. On BRI lines there is nothing like CRC/CRC4 and that is the reason, why the config is not loading any more. On a PTMP line there may be some CRC-errors from time to time, when the provider shuts down the line, which is normal in some countries. But this has nothing to do with Your initial problem. Unfortunately I don't know a solution for Your problem. It may be a hardware issue. HTH, Karsten -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users