On Tue, Oct 18, 2011 at 8:46 PM, bilal ghayyad <bilmar...@yahoo.com> wrote: > Dear; > > By the way, the asterisk version that I have is 1.8.4.2 and DAHDI version is > 2.4.1.2 > > Here I would like to mention the following: > > 1) As per the telecom provider, they said they openned for us all the digits > to send (two digits, 4 digits, all the digits ...) as they said.
With no screening? Make sure they allow you to set to at least the DIDs that are allowed in. > > 2) The caller id appear for me at the CLI as: 5631030 (and actually this is > the primary key). > > 3) I am settings in the systems.conf file the loadzone to be uk us and the > defaultzone to be uk, does this effect? Maybe I have to set us. > > 4) I am sending the numbers within my range it is from 5631030 to 5631059, > and actually I tried to set the caller id to be 40, 1040, 5621040, and > 065621040 > > 5) It is E1 ISDN. > > 6) About the: > > Set(CALLERID(pres)=allowed) > > How can I know the updated changes? > By the way: is it important to be set? > > 7) How about the Set(CALLERID(num)=1040), is it in the right syntax or also > need to be updated? Also, should I use Set(CALLERID(num)=1040) or > Set(CALLERID(num)=<1040>)? > > What other factors I am missing? What I have to check? > > Regards > Bilal > > --------------- > >> On Tuesday 18 October 2011, bilal ghayyad wrote: >> > We contacted the Telecom provider and they confirmed >> multiple times that >> > the DID service is enabled, but again still the caller >> id does not appear >> > as we need (it is always appearing as the primary >> number). I tried to set >> > the CALLERDID(num) to be 40, 1040, 5631040 and >> 065631040 without any >> > result. >> > >> > Where could be the problem? >> > >> > Maybe I have to use CALLERID(ANI)? Well, how it should >> be written exactly? >> > >> > What other things I have to do or I can try to resolve >> the problem? >> >> What format do your incoming caller IDs come >> in? (use a NoOp() or Verbose() >> statement to write to the log.) One would expect >> outgoing caller IDs to be >> set in the same format (but speak to someone at the >> telco for confirmation of >> this). Our provider (in the UK) expects >> our outgoing caller IDs to include >> the STD code, but without the initial 0. So 065631040 >> would be sent as >> 65631040 . >> >> >> Are you definitely allowed to set your own caller ID? >> It may well be >> restricted to one of a range of "presentation numbers" >> assigned to you. >> >> >> One other thing: CALLERPRES() has been deprecated for >> awhile now, so in newer >> Asterisk versions you may need to write >> Set(CALLERID(pres)=allowed) instead of >> Set(CALLERPRES()=allowed . >> >> -- >> AJS >> >> Answers come *after* questions. >> >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users