-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Markus Sent: Saturday, August 25, 2012 3:08 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] Basic GotoIf question
Hi all, on Asterisk 1.4.21 I'm trying to block, that means directly hang up on, several inbound caller ID's like this: exten => 5555,1,GotoIf($["${CALLERID(num)}" != "6666"]?pass) exten => 5555,n,GotoIf($["${CALLERID(num)}" != "7777"]?pass) exten => 5555,n,GotoIf($["${CALLERID(num)}" != "8888"]?pass) exten => 5555,n,Hangup exten => 5555,n(pass),Set... everything from here on works. When I'm calling with caller ID 6666 I get hung up. When I'm calling from 7777 or 8888 I get connected. That means on the first GotoIf match the remaining GotoIf's are ignored. How can I avoid that? I'm a bit surprised, because "Example 3" at http://www.voip-info.org/wiki/view/Asterisk+cmd+GotoIf shows that it should actually be working. A few more questions - the doc link that I just mentioned shows: " GotoIf(condition?label1[[:label2]) " What is the [[ before :label2? There are two opening square brackets, but just one ] closing? Is that a typo? Also, the doc shows: " GotoIf(condition?[label1]:label2) " Why is label1 in square brackets and label2 isn't? I'm confused. :) Thanks so much! Markus --- You need to run your logic the other way. What you're doing now is "if it's not CallerID A, pass it through and accept" So change to: exten => 5555,1,GotoIf($["${CALLERID(num)}" = "6666"]?hangup) exten => 5555,n,GotoIf($["${CALLERID(num)}" = "7777"]?hangup) exten => 5555,n,GotoIf($["${CALLERID(num)}" = "8888"]?hangup) exten => 5555,n,Set... ...more logic for accepted calls... exten => 5555,n(hangup),Hangup() -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users