-----Original Message-----
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Paul Belanger
Sent: Wednesday, September 26, 2012 7:52 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Asterisk 1.8.15.0, Requested transfer
capability: 0x00 - SPEECH
On 12-09-26 10:35 AM, motty.cruz wrote:
> Hello,
> I'm having issues connecting throu PRI with the following error
> "Requested transfer capability: 0x00 - SPEECH"
>
> Below are the logs:
>
>
>
> == Using SIP RTP CoS mark 5
> -- Executing [97052660@voipphones:1] Set("SIP/4856-00000003",
> "CALLERID(num)=xxxxxxxxx") in new stack
> -- Executing [97052660@voipphones:2] Dial("SIP/4856-00000003",
> "dahdi/g1/97052660") in new stack
> -- Requested transfer capability: 0x00 - SPEECH
> -- Called dahdi/g1/97052660
> -- Span 1: Channel 0/1 got hangup, cause 27
> -- DAHDI/i1/97052660-4 is circuit-busy
> -- Hungup 'DAHDI/i1/97052660-4'
> == Everyone is busy/congested at this time (1:0/1/0)
> -- Auto fallthrough, channel 'SIP/4856-00000003' status is
'CONGESTION'
>
> /etc/asterisk
> Chan_dahdi.conf
>
> [trunkgroups]
> [channels]
> ; PRI to Telco
> callerid=asreceived
> context=fromtelco
> switchtype=national
> signalling=pri_cpe
> group=1
> channel => 1-23
>
> ; pri to PBX
> context=frompbx
> switchtype=national
> signalling=pri_net
> group=2
> channel => 25-47
>
> In /etc/dahdi
> Modules
>
> Wct4xxp
>
> /etc/dahdi
> System.conf
>
> # PRI to Telco
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> # PRI to PBX
> span=2,0,0,esf,b8zs
> bchan=25-47
> dchan=48
>
>
> Any suggestoins are welcome!
> Thanks in advance!
>
You are dialing a 8 digit number. Why?
/* I'm dialing 8 digits because in my extensions.conf required user to dial
9 for outgoing calls. */
Also:
Cause No. 27 - destination out of order.
This cause indicates that the destination indicated by the user cannot be
reached because the interface to the destination is not functioning
correctly. The term "not functioning correctly" indicates that a signal
message was unable to be delivered to the remote party; e.g., a physical
layer or data link layer failure at the remote party or user equipment
off-line.
/* thanks for pointing that out, I overlook "Cause No. 27". I will check
aging my Dahdi configuration */
--
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter:
https://twitter.com/pabelanger
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
