Hi all, I need some advice - I have been working on originating multiple calls using AMI and then joining them. What I want to do is: - dial call 1 (where the caller is in a "channel" format, like SIp/1234 or Local/1234@ext) and "park" it somehow - dial call 2 (where again the caller is in channel format) and join it to the previous call.
As a requirement, I cannot use the dialplan as an end-point (as I cannot change it) but need to use the AMI only. I tried doing something like: Action: Originate Channel: Local/300@from-internal Async: 1 Application: Wait Data: 1973 So that the call goes to 300 and then basically stays there forever, and then I dial again: Action: Originate Channel: Local/500@from-internal Async: 1 Application: Wait Data: 1973 And then try to bridge the results, but it does not seem to work. What I would like to do would be more on the lines of: Originate call 1 and park it (using a park or waiting) Originate call 2 and bridge it immediately to call1 (using the Application part) But maybe I am missing something? is there anybody who has better suggestions? Thanks l. -- Loway - home of QueueMetrics - http://queuemetrics.com Test-drive WombatDialer beta @ http://wombatdialer.com
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users