I have a system with two Sangoma A104D cards running Asterisk 1.8.11-cert10, Dahdi 2.5.0.1, LibPRI 1.4.12, and Wanpipe 3.5.23. The PRI spans are configured with esf,b8zs. Everything has been working great, which is why I haven't updated it further. You might try an older Dahdi version just to see. Although this might be tricky depending on the OS version.
Ryan On Mon, Dec 9, 2013 at 5:56 PM, Jeff LaCoursiere <j...@jeff.net> wrote: > Upgrading an ancient customer installation... was running 1.4.23.1 > (Trixbox) with Zaptel 1.4.12.9 and a Sangoma A102D, which has been running > fine for 5+ years. Customer getting anxious about hardware failure, so we > built a new box and installed 1.8.24.0, Dahdi 2.7.0.1, and a new Sangoma > A104D. The single active span is an RBS T1 B8ZS/ESF/E&M Wink. > > I tried to move one span over one night which was working fine on the old > box. Once plugged in there were no alarms, Sangoma wanpipemon utility > showed "connected". I tried calling in on a DID number, and in the 'full' > log, with debug and verbose set to 100: > > [Dec 5 00:51:37] VERBOSE[5283] sig_analog.c: -- Starting simple > switch on 'DAHDI/9-1' > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=1.17E+04, Et=1.45E+06, > s/n= 0.01 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=2.76E+03, Et=1.10E+06, > s/n= 0.00 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=2.06E+04, Et=1.39E+06, > s/n= 0.01 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=4.68E+03, Et=1.40E+06, > s/n= 0.00 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=0.00E+00, Et=0.00E+00, > s/n= -nan > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=0.00E+00, Et=0.00E+00, > s/n= -nan > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=0.00E+00, Et=0.00E+00, > s/n= -nan > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=0.00E+00, Et=0.00E+00, > s/n= -nan > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=0.00E+00, Et=0.00E+00, > s/n= -nan > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=1.30E+10, Et=2.11E+12, > s/n= 0.01 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: analog_exception 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Exception on 15, channel 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: __analog_handle_event 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Got event > UNKNOWN/OTHER(131127) on channel 9 (index 0) > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: DTMF Down '7' > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Begin DTMF digit: 0x37 '7' on > DAHDI/9-1 > [Dec 5 00:51:38] DEBUG[5283] chan_dahdi.c: Begin DTMF digit: 0x37 '7' on > DAHDI/9-1 > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF begin '7' received on > DAHDI/9-1 > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF begin ignored '7' on DAHDI/9-1 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=2.02E+10, Et=4.01E+12, > s/n= 0.01 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=1.88E+10, Et=3.89E+12, > s/n= 0.00 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=4.78E+10, Et=1.17E+12, > s/n= 0.04 > [Dec 5 00:51:38] DEBUG[5283] dsp.c: tone 1100, Ew=5.10E+03, Et=6.26E+06, > s/n= 0.00 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: analog_exception 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Exception on 15, channel 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: __analog_handle_event 9 > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Got event > UNKNOWN/OTHER(262199) on channel 9 (index 0) > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: Detected digit '7' > [Dec 5 00:51:38] DEBUG[5283] sig_analog.c: End DTMF digit: 0x37 '7' on > DAHDI/9-1 > [Dec 5 00:51:38] DEBUG[5283] chan_dahdi.c: End DTMF digit: 0x37 '7' on > DAHDI/9-1 > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF end '7' received on > DAHDI/9-1, duration 0 ms > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF end accepted without begin > '7' on DAHDI/9-1 > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF end passthrough '7' on > DAHDI/9-1 > [Dec 5 00:51:38] DEBUG[5283] chan_dahdi.c: Enabled echo cancellation on > channel 9 > [Dec 5 00:51:38] VERBOSE[5283] sig_analog.c: -- Unknown extension '7' > in context 'from-pstn' requested > ... > > At this point I hear 'invalid extension' and get hung up on, but if you > grep out all the DTMF events from this call, you get: > > root@astsouth:/var/log/asterisk# grep 'DTMF end' /tmp/foo | grep received > [Dec 5 00:51:38] DTMF[5283] channel.c: DTMF end '7' received on > DAHDI/9-1, duration 0 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '1' received on > DAHDI/9-1, duration 80 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '5' received on > DAHDI/9-1, duration 80 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '7' received on > DAHDI/9-1, duration 80 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '6' received on > DAHDI/9-1, duration 80 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '0' received on > DAHDI/9-1, duration 80 ms > [Dec 5 00:51:41] DTMF[5283] channel.c: DTMF end '0' received on > DAHDI/9-1, duration 80 ms > > And '715-7600' is the DID number I dialed. So why is the new box > immediately answering the call before it gets all the ANI digits? I've > poured over all Sangoma's docs online for debugging RBS lines - I'm not > having any transmission errors, no overruns, and even the audio of 'invalid > extension' seems clear before it hangs up on me. > > The next maintenance window I swapped out the A104D for a Digium TE122. > Exactly the same issue! Some problem with Dahdi then? > > Any ideas? > > Thanks, > > Jeff LaCoursiere > SunFone > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users