Ok just restart -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Michelle Dupuis Sent: Friday, December 13, 2013 11:46 AM To: Asterisk Users List Subject: Re: [asterisk-users] IAX2 bridge failing
I tried transfer=no, transfer=yer, and transfer=mediaonly (with a "reload" inbetween)....same result I agree it sounds like something either end is using the wrong IP/port address somewhere in the call (yet signalling works fine). Anything else to suggest? I was hoping for an externalip type setting but not in iax2 (at least not in 1.4.x.x) ________________________________________ From: asterisk-users-boun...@lists.digium.com [asterisk-users-boun...@lists.digium.com] On Behalf Of Joshua Colp [jc...@digium.com] Sent: Friday, December 13, 2013 11:44 AM To: Asterisk Users List Subject: Re: [asterisk-users] IAX2 bridge failing Michelle Dupuis wrote: > Some more details...I noticed that the call is bridged, and audio goes > one way. However, the dial command still times out after 35 seconds > (approx), and exists non-zero. > While the channels are up, I did an core show channel xxx and found > Blocking in: > ast_waitfor_nandfds > Is this a bug? Or something I can fix through config? Hola, Set "transfer=no" under the entries in iax.conf for the peers/users/friends/etc in question, reload, retry, and see if that changes the behavior. If it does then something involved may not like IAX2 native transfers. Cheers, -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users