One quickie that usually gets me: On the “Attendant Console” tab, there is a “Server Type” setting in the General section that defaults to Broadcom. This needs to be changed to Asterisk for ANY BLF on the phone to work (regardless of whether or not you’re doing BLF on the phone itself or via an attendant console). This tab is only accessible within the /admin/advanced web interface, or you can use the <Server_Type> configuration option within the pseudo-XML config files, if you’re doing auto provisioning.
Noah Engelberth MetaLINK Technologies From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of ke...@ncwcom.com Sent: Sunday, March 02, 2014 12:04 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] cisco spa phones and sal Hi I have been trying for several days get 3 Cisco spa508g phones (firmware 7.5.5) to work with asterisk 11.6 cert1 and sla. I can get the phones to all ring when an incoming call arrives, and I see the slatrunk working. However the blf function does not work. If one extension picks up the call the others do not show the trunk in use. And as you might expect the hold and outbound dialing does not work. I do not think the problem is with the sla config on asterisk, but rather the setup in the phone. Does anyone have an example config for the spa phones. Thanks Kelly ________________________________ Email sent using Atmail - Email, Groupware and Calendaring done right.
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users