Hello,
I would like to use AMD on outgoing calls using analog line. I tested
with SPA3102 and cisco2811 as gw and asterisk 1.8.26.1 as well as 11.8.1
Other end is analog number behind another cisco/asterisk, also tested
calling a mobile number with the same result.
What I did: dial is done like exten => s,n,Dial(SIP/<IP gw>/<dialed
number>,,M(myMacro)), which tell Asterisk to execute myMacro when the
call is answered by calling party.
[myMacro]
exten => s,1,NoOP(Executed when call is answered)
same => n,AMD()
same => n,NoOp(Dial status=${DIALSTATUS})
same => n,NoOp(AMD status=${AMDSTATUS} cause=${AMDCAUSE})
same => n,MacroExit()
Problem is that [myMacro] is executed as soon as the call is going out
from the gw (cisco or linksys) and before called party answered.
DIALSTATUS is empty (should be ANSWER), AMDSTATUS=NOTSURE and
AMDCAUSE=TOOLONG-5000 which seems OK as DIALSTATUS isn't reliable.
The same dialplan using a SIP trunk is working as expected.
So question is, why, when using analog line, I dont get the right behavior.
Thanks for any hint
--
Daniel
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users