On Sat, 08 Jan 2022 19:17:57 -0500, Antony Stone wrote: > > On Sunday 09 January 2022 at 00:50:27, John Covici wrote: > > > Hi. I am using asterisk 18.3 and freepbx. > > Hm, which version of FreePBX uses Asterisk 18.3? > > > How can both sip and pjsip be listening at port 5060 at the same time > > They can't. > > One might be on TCP and the other on UDP, but you can't have them both > listening on the same port with the same protocol. > > > for instance I get: > > > > [2022-01-08 17:08:59] SECURITY[244351] res_security_log.c: > > SecurityEvent="FailedACL",EventTV="2022-01-08T17:08:59.957-0500",Severity=" > > Error",Service="PJSIP",EventVersion="1",AccountID="anonymous",SessionID="20 > > 25076022",LocalAddress="IPV4/UDP/166.84.7.53/5060",RemoteAddress="IPV4/UDP/ > > 45.134.144.118/5823",ACLName="registrar_attempt_without_configured_aors" > > What makes you think chan_sip and pjsip are both listening on UDP 5060? > > > I would like pjsit not to listen,till I figure out how to configure > > the thing, so my logs don't fill up with messages. > > > > Thanks in advance for any suggestions. > > As far as I recall using FreePBX, there is a selector for the SIP protocol to > tell it whether you want it to use pjsip or chan_sip. I don't think it even > supports using both at the same time, so simply make sure that is set to > chan_sip and you should be fine. > > On the other hand, why do you need to learn "how to configure the thing" if > you're using FreePBX? Part of the whole point is that it does the fiddly > techie sutff in the background for you, and you just need to use the > personnel- > department-friendly web GUI.
This is what I thought as well, I just generated one trunk using the old chan_sip and expected nothing from pjsit, yet I get all kinds of errors like [2022-01-08 17:08:59] WARNING[487628] res_pjsip_registrar.c: Endpoint 'anonymous' (45.134.144.118:5823) has no configured AORs so I am very confused as to why this is happening. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users