We have a couple of parallel ring settings (and this has worked well for eons).
Either in the form of same => n,Dial(SIP/1001 & SIP/1002 & SIP/1003 …..) Or via a subroutine (below) that has a bit of extra logic: FOO = 1010 & 1019 & 1017 & 1033 ... same => n,gosub(sub-callout,s,1,(${FOO},”Ringing all class FOO telefons")) Now I have two types of phones (different) era’s that require slightly different Alert-Info headers. How can one introduce a layer of indirection at phone (extension) level that adds those headers ? E.g. something like above 1010 mapping to ; map internal virtual number to the real SIP dial [1010] .. SIPAddHeader(Alert-Info: <http://127.0.0.1>\;info=alert-internal) .. Dail(SIP/2010) But still have the phones all ring in parallel. Any and all suggestions welcome. With kind regards, Dw. [sub-callout] exten => s, 1,Log(NOTICE, Ringing ${ARG2}) same => n,Set(DIALGROUP(allgroup)=) same => n,While($[${LEN(${ARG1})} != 0]) same => n,Set(PEERNAME=${SHIFT(ARG1,&)}) ; Skip any peer that is currently not connected same => n,ExecIf($[0${SIPPEER(${PEERNAME},port)} != 0]?Set(DIALGROUP(allgroup,add)=SIP/${PEERNAME})) same => n,EndWhile() ; Play congestion tone if there are no peers connected in this list same => n,ExecIf($[${LEN(${DIALGROUP(allgroup)})} = 0]?Congestion(10)) same => n,Log(Notice, to ${DIALGROUP(allgroup)}) ; For the 95XX phones; prevent a ‘missed call’ entry. same => n,Set(_CISCO_HUNTPILOT="Ring All" <${EXTEN}>) same => n,Dial(${DIALGROUP(allgroup)},120,ic) same => n,Hangup() same => n,Return() -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users