> On Jan 2, 2024, at 23:17, the...@sys-concept.com wrote: > > On 1/2/24 15:13, aster...@phreaknet.org wrote: >>> On 1/2/2024 4:03 PM, the...@sys-concept.com wrote: >>> I'm using asterisk-16.30.1 >>> >>> When I try to call another asterisk server over IAX I get a busy signal, >>> >>> chan_iax2.c:4739 __auto_congest: Auto-congesting call due to slow response >>> -- IAX2/192.168.143.1:4569-656 is circuit-busy >>> >>> Asterisk-16.16 is working normally, no congestion error. >> There is not enough information for anyone to really help or comment on this. >> Dialplan and IAX2 configuration on both sides of the trunk? >> CLI output on both sides with iax2 debug enabled? > > It is very simple: > > Local Asterisk, iax.conf: > > [clinic_server] > type=friend > host=dynamic > context=internal > disallow=all > allow=ulaw > allow=alaw > requirecalltoken=no > callgroup=1 > pickupgroup=1 > > extension.conf: > > exten => 4,1,Dial(IAX2/home_server:xxxxxxxx@${clinic_server}/${EXTEN},60,rw) > exten => 4,n,Hangup() Remote Asterisk iax.conf: > > [home_server] > type=friend > host=dynamic > secret=xxxxxxxx > context=extensions > disallow=all > allow=ulaw > allow=alaw > callgroup=1 > pickupgroup=1 > > Remote extension.conf: > > exten => 4,1,Dial(SIP/4,15,trw) > exten => 4,n,GotoIf($["${DIALSTATUS}"="BUSY"]?vmail:line2) > exten => 4,n(line2),Dial(SIP/54,20,rw) > exten => 4,n(vmail),Voicemail(4) > exten => 4,n,Voicemail(4) > exten => 4,n,Hangup() > >
You have no internal context in your dialplan. But in your iax.conf you specify internal as your context. -H -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users