Thanks John. Do you by chance know how to build a flashing image for the bbb?
On Fri, Aug 1, 2014 at 2:02 PM, John Syn <john3...@gmail.com> wrote: > > From: Dallas Clement <dallas.a.clem...@gmail.com> > Reply-To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> > Date: Friday, August 1, 2014 at 11:42 AM > To: "beagleboard@googlegroups.com" <beagleboard@googlegroups.com> > Subject: Re: [beagleboard] Difficulty building kernel + Angstrom from > source > > I found another related topic in this discussion group which helped me get > past this. > > > http://beagleboard.org/Community/Forums?place=topic%2Fbeagleboard%2FKhBhvyBVOXQ%2Fdiscussion > > I was able to build Angstrom just fine following these instructions. > > These instructions are a little old. Use branch angstrom-v2014.06-yocto1.6 > > Regards, > John > > > > > On Fri, Aug 1, 2014 at 9:19 AM, Dallas Clement <dallas.a.clem...@gmail.com > > wrote: > >> Hi All, >> >> I would like to be able to reliably build my own images for u-boot, the >> kernel, and the Angstrom rootfs. I have followed this guide in using Yocto >> / OE to do so, but no joy. >> >> http://wp.angstrom-distribution.org/?page_id=53 >> >> >> It looks like this stuff is not fully baked for the bbb. When I tried to >> build the kernel, it failed while building the Linaro toolchain. When I >> tried to build Angstrom it failed with errors also. >> >> >> Could someone please point me to the right place to look for source that >> will build reliably. I don't really have the time or desire to be >> debugging OE and the build recipes. I really wish they had used a simpler >> tool like Buildroot for this. >> >> >> Thanks, >> >> >> Dallas >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/Qft8WHgSwq0/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/Qft8WHgSwq0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.