> It is a software RAID, and I am struggling with Robert's scripts :(

I dunno anything about that. I can only say what I would do.
I would provide enough info about what I've tried so far then someone might 
know right away what's up.

Ok here we go:

A couple of months ago I was looking for a Debian image with software RAID 
support.
The one I was using did not. Robert kindly pointed me to one that, as it turned 
out had 'crippled' RAID
support. In that while 'md' was present none of the software RAID Modem modules 
were.
I tried to get some help just "adding" the modules support to my existing 
image. But nobody replied.

So I looked around an found the following instructions:

-------------------------------------------------------------------
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-3.14.y -b tmp
./build_kernel.sh

After that kernel upgrades are as easy as:

wget http://rcn-ee.net/deb/raring-armhf/v3.8.13-bone28/install-me.sh
sudo /bin/bash install-me.sh

---------------------------------------------------------------------

The first part compiled a Kernel, but I can't get it to load to a uSD card and 
work properly.
I modified 'system.sh' per the instructions in the README file.

I copied a Debian image to the uSD card and then ran "install_kernel.sh". 
I can find out what the image file name was, I just didn't have it handy.
The result was a uSD card that doesn't boot.

All I can think is that there is kernel mismatch or something. 
Either that or I selected the wrong options during the 'build kernel' phase.
That's why I was looking for a .config file from somebody that I know works.

Any help would be REALLY appreciated at this point.

Bill

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to