On Sun, Mar 8, 2015 at 5:42 PM, Enoch <i...@hotmail.com> wrote: > Thanks Robert, > > Letting your jessie image update itself brought python to the latest 2.7.9 > version which is a good news.
I saw that yesterday, suprised me as: https://packages.debian.org/jessie/python still only lists 2.7.8... > Is there any write-up on BBB jessie? I see that wheezy serial port naming > /dev/ttyO* was replaced by the traditional /dev/ttyS* So going forward /dev/ttyS* is the new default.. However if your running systemd you won't notice the serial console changes for login... For /dev/ttyO* -> /dev/ttyS* we do have a udev rule setup.. https://github.com/RobertCNelson/omap-image-builder/blob/master/tools/setup_sdcard.sh#L1045 just not fully tested.. but it worked last week.. Hopefully i've done enough, where most people won't notice. ;) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.