Not sure if it is the same thing, but my ISP has what they call “fair use policy”
where they throttle back the bandwidth after a few seconds of file transfer. If you start and stop the transfer, the speed goes back up briefly. Could your network be doing the same thing ?? From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Phil Mills Sent: Friday, June 26, 2015 1:28 PM To: beagleboard@googlegroups.com Subject: [beagleboard] Re: SCP / RSYNC stall out with "rcvd adjust [...]" notices - 2015-03-01 and 64-bit Wheezy host Got a GigE desktop switch and connected directly (previously both the Beaglebone and my workstation were connected through the corporate network) and the problem goes away. So it's not an issue with the BB code (thankfully), but any insights as to what tweaks/settings I can point our network staff towards would be helpful. On Thursday, June 25, 2015 at 5:05:59 PM UTC-6, Phil Mills wrote: Testing with various Windows SCP utilities fails in a similar way. The transfer starts out fine and then rapidly throttles down to extinction. WinSCP, SmarTTY -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6037 / Virus Database: 4365/10102 - Release Date: 06/26/15 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.