http://www.elinux.org/Beagleboard:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28C.29
These are latest files. There i sno Rev C PCB. Rev C was a result of a processor change as you can see on the link I provided that goes to the support WIKI. Altium files are provided. Gerald On Tue, Mar 7, 2017 at 1:17 PM, <jam...@cladnetwork.com> wrote: > Hi all, > > I am the lead electrical engineer for a small company based in New York > State. We have been using both the Beaglebone Green and Beaglebone Black > internally for hardware development purposes for the past couple of months > for an upcoming product. We are early in the process of transitioning to a > production-grade single board hardware design for said product. > > I am looking for CAD files for the Beaglebone Black Rev C to use as a > starting point in the board design process. Can anyone here point me > towards for provide me with Altium Designer files for the BeagleBone Black > Rev C? We do not use Cadence Allegro to design our boards, and have no way > of converting the available OrCAD/Allegro CAD files to an Altium Designer > compatible format. > > I would much rather not have to redesign a complicated & nontrivial board > layout for an open-source hardware product such as this, especially given > that the open-source nature of BeagleBone was the most motivating factor in > choosing it as a development and prototyping tool. > > Note that we are not modifying any part of the BeagleBone Black's design > (except removing the 2X23 female headers and HDMI hardware). We are using > it as a base and adding additional functionality via peripheral components > that are integrated on the same board. > > Thank you for any help that you can provide. > > I look forward to hearing back, > James > > *Disclaimer: I fully understand that these files would come as is, with no > warranty or guarantee of suitability or merchantability for any purpose. > > **There is a separate thread for BeagleBone Green related responses. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/dafaab18-eefb-4cc1-a1d0-56dd311f4929%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/dafaab18-eefb-4cc1-a1d0-56dd311f4929%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ gcol...@emprodesign.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BfL1qswH4%2BZ6fAVrV-qcy0%3DZ1o1fVoEYt1QDMSJ8MHYMQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
