Thanks Robert. So pretty much still a work in progress I take it ? On Thu, Sep 21, 2017 at 10:17 AM, Robert Nelson <robertcnel...@gmail.com> wrote:
> On Thu, Sep 21, 2017 at 11:41 AM, William Hermans <yyrk...@gmail.com> > wrote: > > The board is bootble / usable right now ? The FAQ could be taken both > ways. > > e.g. because of the board overlay file. > > https://rcn-ee.net/rootfs/bb.org/testing/2017-09-19/ > stretch-iot/bone-debian-9.1-iot-armhf-2017-09-19-4gb.img.xz > > > U-Boot SPL 2017.09-00003-g02f3fd3962 (Sep 20 2017 - 14:09:02) > Trying to boot from MMC1 > > > U-Boot 2017.09-00003-g02f3fd3962 (Sep 20 2017 - 14:09:02 -0500) > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > No match for driver 'omap_hsmmc' > No match for driver 'omap_hsmmc' > Some drivers were not found > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Model: BeagleBoard.org PocketBeagle > <ethaddr> not set. Validating first E-fuse MAC > Net: eth0: RGMII MODE > Could not get PHY for cpsw: addr 0 > cpsw > Press SPACE to abort autoboot in 2 seconds > board_name=[A335PBGL] ... > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > ** Bad device 0:2 0x82000000 ** > ** Bad device 0:2 0x82000000 ** > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > switch to partitions #0, OK > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > Checking for: /uEnv.txt ... > Checking for: /boot.scr ... > Checking for: /boot/boot.scr ... > Checking for: /boot/uEnv.txt ... > gpio: pin 55 (gpio 55) value is 1 > 2595 bytes read in 27 ms (93.8 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > gpio: pin 56 (gpio 56) value is 1 > Running uname_boot ... > loading /boot/vmlinuz-4.4.88-ti-r122 ... > 8665976 bytes read in 572 ms (14.4 MiB/s) > loading /boot/dtbs/4.4.88-ti-r122/am335x-pocketbeagle.dtb ... > 71821 bytes read in 145 ms (483.4 KiB/s) > uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to > enable... > loading /boot/initrd.img-4.4.88-ti-r122 ... > 5514927 bytes read in 368 ms (14.3 MiB/s) > debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 quiet] ... > debug: [bootz 0x82000000 0x88080000:5426af 0x88000000] ... > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Ramdisk to 8fabd000, end 8ffff6af ... OK > Loading Device Tree to 8faa8000, end 8fabc88c ... OK > > Starting kernel ... > > [ 0.001144] clocksource_probe: no matching clocksources found > [ 2.118518] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle > [ 2.227684] omap_voltage_late_init: Voltage driver support not added > [ 2.238761] PM: Cannot get wkup_m3_ipc handle > [ 2.776365] musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise > (80, <SessEnd), retry #3, port1 0008010c > > Debian GNU/Linux 9 beaglebone ttyS0 > > BeagleBoard.org Debian Image 2017-09-19 > > Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian > > default username:password is [debian:temppwd] > > beaglebone login: > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/CAOCHtYh-CjPoTELw_RqVzu_YF5eR27c9yMnCUxcaSAs-zA981g% > 40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORryJ4sFHbNYstNYarTk13faxWJfypQDt_qCk5qZCP800w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.