Does USB work after 30-45 seconds? If so, still trying to debug that.. On Fri, May 14, 2021, 7:23 PM John Dammeyer <jo...@autoartisans.com> wrote:
> Hi Robert, > Not that set in stone really. Just that the last time I did one of those > "you must upgrade to get support" I ended up buying a new edition of Derek > Molloy's book because the $SLOTs stuff vanished which also made 5 other > books I have on the Beagle pointless for the most part. > > Between editions and versions my 4DCape LCD display also no longer worked > so it's in the box of useless LCD displays along with the Manga 1 (never > worked right) and Manga2. > > How much of the step by step instructions in Derke Molloy's (c) 2019 2nd > edition are voided and how will I know what is supposed to work and not. > > I've done the following. > cd /opt/scripts/tools/ > sudo ./update_kernel.sh > # and reboot.. > now run: > sudo /opt/scripts/tools/version.sh > > >We should see a more friendly setup. ;) > > ============================================================= > debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh > [sudo] password for debian: > git:/opt/scripts/:[81709cddd6994c0c6895b5d31a73ac459f252fa0] > eeprom:[A335BNLT00C02814BBBK0472] > model:[TI_AM335x_BeagleBone_Black] > dogtag:[BeagleBoard.org Debian Image 2018-10-07] > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot SPL > 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000)]:[location: dd MBR] > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot > 2019.04-g10968f0]:[location: dd MBR] > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot SPL 2019.04-g10968f0 > (Feb 19 2021 - 21:40:51 +0000)]:[location: dd MBR] > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2019.04-g10968f0]:[location: dd MBR] > UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts] > UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-14-TI-00A0] > UBOOT: Loaded Overlay:[BB-ADC-00A0] > UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0] > UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0] > UBOOT: Loaded Overlay:[cape-CBB-Serial-r01] > kernel:[4.14.108-ti-r141] > nodejs:[v6.17.0] > /boot/uEnv.txt Settings: > uboot_overlay_options:[enable_uboot_overlays=1] > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] > uboot_overlay_options:[enable_uboot_cape_universal=1] > pkg check: to individually upgrade run: [sudo apt install --only-upgrade > <pkg>] > pkg:[bb-cape-overlays]:[4.14.20210416.0-0~stretch+20210416] > pkg:[bb-customizations]:[1.20210225.0-0~stretch+20210225] > pkg:[bb-usb-gadgets]:[1.20200504.0-0~stretch+20200504] > pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~stretch+20200813] > pkg:[kmod]:[23-2rcnee1~stretch+20171005] > pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~stretch+20200716] > pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~stretch+20200305] > groups:[debian : debian adm kmem dialout cdrom floppy audio dip video > plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep > admin spi tisdk weston-launch xenomai] > cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait > uboot_detected_capes=cape-CBB-Serial, coherent_pool=1M net.ifnames=0 quiet] > dmesg | grep remote > [ 1.096197] remoteproc remoteproc0: wkup_m3 is available > [ 1.440935] remoteproc remoteproc0: powering up wkup_m3 > [ 1.441056] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217148 > [ 1.445403] remoteproc remoteproc0: remote processor wkup_m3 is now up > dmesg | grep pru > dmesg | grep pinctrl-single > [ 0.796756] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > dmesg | grep gpio-of-helper > [ 0.809620] gpio-of-helper ocp:cape-universal: ready > lsusb > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > END > debian@beaglebone:~$ > ================================================================== > > Sees the cape now. Mouse and keyboard no longer work. In fact USB > doesn't work at all. > John > > > > > > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2015.01-00001-gb2412df]:[location: dd MBR] > > > > Oh fun, 2018 wth 2015 causing issues.. > > > > how set in stone are your for "2018-10-07" Release? > > > > Regards, > > > > -- > > Robert Nelson > > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYix%2B9yHdarF7JbbrkagUdH-JX-0sE1dbiyKqkNs-dAoHw%40mail.gmail.com.
