6 mA. Voltage dividers, 5k1 resistors going into the pin, filter capacitors and TVSS. Use more than one, better yet all of them. Or buy a crate of BBs cause you’ll burn out a few while prototyping. Don’t ask me how I know.
Best Regards, Steve Lentz > On Nov 15, 2022, at 4:33 PM, Chris Green <c...@isbd.net> wrote: > > I can't find this anywhere in the System Reference Manual. What is > the drive capability of the BBB output pins? Also what is the best way > of buffering them so they won't get any bad voltages fed back into > them? > > -- > Chris Green > · > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/t9cd4j-etjj2.ln1%40esprimo.zbmc.eu. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7B0457A1-F0D0-4EBA-8865-81BA8D295C09%40gmail.com.