Thanks, then in the meantime I'll be doing the tutorials and changing the outdated blocks when will be necessary. Any problem it will be report in the mail list.
2013/1/16 Jason Manley <jman...@ska.ac.za> > It _might_ work out the box. Next week we'll be updating the tutorials to > work on Matlab 2012b and Xilinx 14.3, so then it should definitely work. > Until then, you might just need to replace some of the outdated blocks (the > pfb_fir and fft_wideband_real, for example, come to mind). In any event, > you should be able to open the design and look at it; it might just not > simulate or build properly. > > The control software should work fine as-is. > > Jason > > On 16 Jan 2013, at 17:01, Arturo Veras wrote: > > > The tutorials says that the software requirements are. > > > > Ubuntu 10.10 SMP x86_64 GNU/Linux > > Matlab 2008b > > Xilinx ISE version 11.5 > > CASPER lib gits_100511 > > > > but i have installed MSSGE Setup with Xilinx 14.2 and Matlab 2012a - > Ubuntu 12.04/Matlab 2012a/Xilinx 14.2 and > https://github.com/ska-sa/mlib_devel.git libray. > > > > i will have to change to the tutorial requirements or the updated > software is ok? > > > > 2013/1/16 Jason Manley <jman...@ska.ac.za> > > Yes, this is possible. See tutorial 4 for an example. > > > > https://casper.berkeley.edu/wiki/Tutorials > > > > Jason > > > > On 16 Jan 2013, at 16:22, Arturo Veras wrote: > > > > > hi, > > > > > > It is possible to generate a correlator with data otuput through 1Gbit > RJ45 Ethernet? > > > We have 1 ROACH and 1 computer with no 10Gbe. > > > -- > > > Atte. > > > Arturo > > > > > > > > > > -- > > Atte. > > Arturo > > -- Atte. Arturo
