When a dynamips host is running the vm listens on an ip address
(usually "localhost" but I think this can be changed) with each vm
listening on a different port.
HTH,
Rogelio
Sent from my iPhone
On Dec 26, 2009, at 2:39 PM, Ahmed Haji Munye <ahmhaj...@yahoo.se>
wrote:
Hi
On the detailed solution task 24.3, it says " Set R2 to advertise
itself as as the RP for the first half of all groups"
R2(config)#access-list 6 permit 224.0.0.0 7.255.255.255
R2(config)#ip pim send-rp-announce loopback 0 scope 10 group-list 6
My questios is:
Will all multicast traffic be travelling from Loopback0?
What is " scope 10 " s job (what is the function of scope 10) ?
Regards
Ahmed
Låna pengar utan säkerhet.
Sök och jämför lån hos Kelkoo.
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com