On Wed, May 30, 2018 at 7:09 PM, Marc Howard via cctalk <cctalk@classiccmp.org> wrote: > Was there ever an I2C decoder created for the 16500/16700? > > Marc
The older analyzers were never that great for serial protocol decoding. The solution used with the HP 10342B RS-232 preprocessor interface was to throw hardware at the problem with a Zilog SIO/1 to turn the serial bits into parallel bytes, along with a Z80 CPU to configure the SIO/1. http://www.bitsavers.org/test_equipment/hp/logic_analyzer_preprocessors/photos/10342B/10432B_T.jpg The 16700 series software has the B4601B Serial Analysis Tool Set. You need to install a license to use that, which has been made available. I have never really tried to do anything with the B4601B Serial Analysis Tool Set and have no idea if it would be of any help for I2C analysis.