Or it was removed and the config wasn’t updated. Sent from my iPhone
> On Jun 14, 2023, at 14:47, Bill Degnan via cctalk <cctalk@classiccmp.org> > wrote: > > Obviously I opened the box. So Inguess the Turbo board is just > "motherboard" > Bill > >> On Wed, Jun 14, 2023, 4:21 PM Chris Zach via cctalk <cctalk@classiccmp.org> >> wrote: >> >> I used to use (and service) PC Limited stuff back in the 90's at Macro. >> I don't remember a turbo board, just a normal XT system board. Pop the >> case open and check. >> >> If I recall PC Limited and Dell (what they became) came with call in >> service from Xerox. Maybe give them a call? ;-) >> >> CZ >> >>> On 6/14/2023 1:08 PM, Wayne S via cctalk wrote: >>> Open it up and take a look. Maybe the daughterboard it there and just >> needs reseating. >>> >>> Sent from my iPhone >>> >>>> On Jun 14, 2023, at 07:26, Bill Degnan via cctalk < >> cctalk@classiccmp.org> wrote: >>>> >>>> I am getting an error message when I boot up a recently donated PCs >> Limited >>>> XT clone. The error is >>>> >>>> ARC Turbo Board >>>> X Turbo System Error # 04 >>>> >>>> Does anyone have one of these boards, I believe the error means the >> board >>>> has been removed, and the system can't find it/bad board. If so, please >>>> advise the $$. >>>> >>>> I don't think the board is specific to PCs Limted, I found a general >> manual >>>> called "Turbo-XT Main Board" that seems to be the OEM of the PCs >>>> Limited-branded motherboard. I assume there is a separate daughterboard >>>> the the "Turbo" part. Yes? >>>> >>>> Thanks >>>> >>>> Bill >>
