On Thu, 14 Jun 2018, Patrick Begou wrote:
Hi,
I'm facing a problem with setting up LDAP+TLS client authentication in a
kickstart script on CentOS7 for several days.
Setting up manualy the config with system-config-authentication works but I
need to automate this in kickstart for deploying cluster nodes.
This show that the server side is running fine.
At this time the message is
#systemctl status sssd
| ....
sssd[be[default]][2732]: Could not start TLS encryption. error:14090086:SSL
routines:ssl3_get_server_certificate:certificate verify failed (self signed
certificate)|
In my kickstart file I use:
auth --useshadow --enableldaptls --enablecache --passalgo=sha512
--enableldap --enableldapauth --ldapserver="ldaps://my.ldap.server.fr"
--ldapbasedn=dc=my,dc=base,dc=dn
Then in a post install script I download the server and ca certificates and
stops nslcd that I do not use:
echo "TLS_REQCERT allow">>/etc/openldap/ldap.conf
cd /etc/openldap/cacerts/ && wget
http://xxx.xxx.xxx.xxx/Softwares7/LDAPCERTS/ca-bundle.crt && ln -s
ca-bundle.crt $(openssl x509 -hash -in ca-bundle.crt -noout).0
cd /etc/openldap/certs/ && wget
http://xxx.xxx.xxx.xxx/Softwares7/LDAPCERTS/server.crt
cd /
systemctl disable nslcd
I'm unable to see what system-config-authentication is doing more in it's
setup.
Thanks for your help
I'm a bit stumped. My recipe was similar:
authconfig --enableshadow --passalgo=sha512 --enablefingerprint --enableldap
--enableldapauth --ldapserver=ldap.ourcompany.com
--ldapbasedn=dc=ourcompany,dc=com --enablecache --enableldaptls
then, in %post:
curl http://www.ourcompany.com/ca/ca.crt \
-s -o /etc/openldap/cacerts/ca.ourcompany.com.pem
/usr/sbin/cacertdir_rehash /etc/openldap/cacerts
And that did the trick.
The main difference is that you install a bundle of certifcates rather
than a single one. There are two issues:
1. Hashing a certificate bundle does no good as far as I know. Hashes
only work on a single cert, right?
2. Unless told otherwise, openssl looks in only one place for a cert
bundle: ${OPENSSLDIR}/cert.pem (where the value of OPENSSLDIR can
be discovered by running "openssl version -d").
You might take a peek at the ldap_tls_cacertdir discussion in the
sssd-ldap(5) man page, which specifies that certificates should be in
individual files.
My suggestion would be to isolate the CA certificate used to sign your
LDAP server certs, install that as a separate file in
ldap_tls_cacertdir, and run cacertdir_rehash to get the hash correct.
--
Paul Heinlein
heinl...@madboa.com
45°38' N, 122°6' W
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
