Sounds like you're hitting a known issue with v17.2.7. https://github.com/rook/rook/issues/13136
The fix will be in v18.2.1 if it's an option to upgrade to Reef. If not, you'll need to use v17.2.6 until the fix comes out for quincy in v17.2.8. Travis On Thu, Nov 23, 2023 at 4:06 PM P Wagner-Beccard < wagner-kerschbau...@schaffroth.eu> wrote: > Hi Mailing-Lister's, > > I am reaching out for assistance regarding a deployment issue I am facing > with Ceph on a 4 node RKE2 cluster. We are attempting to deploy Ceph via > the rook helm chart, but we are encountering an issue that apparently seems > related to a known bug (https://tracker.ceph.com/issues/61597). > > During the OSD preparation phase, the deployment consistently fails with an > IndexError: list index out of range. The logs indicate a problem occurs > when configuring new Disks, specifically using /dev/dm-3 as a metadata > device. It's important to note that /dev/dm-3 is an LVM on top of an mdadm > RAID, which might or might not be contributing to this issue. (I swear, > this setup worked already) > > Here is a snippet of the error from the deployment logs: > > 2023-11-23 23:11:30.196913 D | exec: IndexError: list index out of range > > 2023-11-23 23:11:30.236962 C | rookcmd: failed to configure devices: > failed to initialize osd: failed ceph-volume report: exit status 1 > https://paste.openstack.org/show/bileqRFKbolrBlTqszmC/ > > We have attempted different configurations, including specifying devices > explicitly and using the useAllDevices: true option with a specified > metadata device (/dev/dm-3 or the /dev/pv_md0/lv_md0 path). However, the > issue persists across multiple configurations. > > tested configurations are as follows: > > Explicit device specification: > > ```yaml > nodes: > - name: "ceph01.maas" > devices: > - name: /dev/dm-1 > - name: /dev/dm-2 > - name: "sdb" > config: > metadataDevice: "/dev/dm-3" > - name: "sdc" > config: > metadataDevice: "/dev/dm-3" > ``` > > General device specification with metadata device: > ```yaml > storage: > useAllNodes: true > useAllDevices: true > config: > metadataDevice: /dev/dm-3 > ``` > > I would greatly appreciate any insights or recommendations on how to > proceed or work around this issue. > Is there a halfway decent way to apply the fix or maybe a workaround that > we can apply to successfully deploy Ceph in our environment? > > Kind regards, > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io > > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
