Hi All... Thank you for continuing to follow this already very long thread.
Pat and Greg are correct in their assumption regarding the 10gb virtual memory footprint I see for ceph-fuse process in our cluster with 12 core (24 because of hyperthreading) machines and 96 gb of RAM. The source is glibc > 1.10. I can reduce / tune virtual memory threads usage by setting MALLOC_ARENA_MAX = 4 (the default is 8 on 64 bits machines) before mounting the filesystem with ceph-fuse. So, there is no memory leak on ceph-fuse :-) The bad news is that, while reading the arena malloc glibc explanation, it became obvious that the virtual memory footprint scales with tje numer of cores. Therefore the 10gb virtual memory i was seeing in the resources with 12 cores (24 because of hyperthreading) could not / would not be the same in the VMs where I get the segfault since they have only 4 cores. So, at this point, I know that: a./ The segfault is always appearing in a set of VMs with 16 GB of RAM and 4 cores. b./ The segfault is not appearing in a set of VMs (in principle identical to the 16 GB ones) but with 16 cores and 64 GB of RAM. c./ the segfault is not appearing in a physicall cluster with machines with 96 GB of RAM and 12 cores (24 because of hyperthreading) and I am not so sure anymore that this is memory related. For further debugging, I've updated http://tracker.ceph.com/issues/16610 with a summary of my finding plus some log files: - The gdb.txt I get after running $ gdb /path/to/ceph-fuse core.XXXX (gdb) set pag off (gdb) set log on (gdb) thread apply all bt (gdb) thread apply all bt full as advised by Brad - The debug.out (gzipped) I get after running ceph-fuse in debug mode with 'debug client 20' and 'debug objectcacher = 20' Cheers Goncalo ________________________________________ From: Gregory Farnum [gfar...@redhat.com] Sent: 12 July 2016 03:07 To: Goncalo Borges Cc: John Spray; ceph-users Subject: Re: [ceph-users] ceph-fuse segfaults ( jewel 10.2.2) Oh, is this one of your custom-built packages? Are they using tcmalloc? That difference between VSZ and RSS looks like a glibc malloc problem. -Greg On Mon, Jul 11, 2016 at 12:04 AM, Goncalo Borges <goncalo.bor...@sydney.edu.au> wrote: > Hi John... > > Thank you for replying. > > Here is the result of the tests you asked but I do not see nothing abnormal. > Actually, your suggestions made me see that: > > 1) ceph-fuse 9.2.0 is presenting the same behaviour but with less memory > consumption, probably, less enought so that it doesn't brake ceph-fuse in > our machines with less memory. > > 2) I see a tremendous number of ceph-fuse threads launched (around 160). > > # ps -T -p 3230 -o command,ppid,pid,spid,vsize,rss,%mem,%cpu | wc -l > 157 > > # ps -T -p 3230 -o command,ppid,pid,spid,vsize,rss,%mem,%cpu | head -n 10 > COMMAND PPID PID SPID VSZ RSS %MEM %CPU > ceph-fuse --id mount_user - 1 3230 3230 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3231 9935240 339780 0.6 0.1 > ceph-fuse --id mount_user - 1 3230 3232 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3233 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3234 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3235 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3236 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3237 9935240 339780 0.6 0.0 > ceph-fuse --id mount_user - 1 3230 3238 9935240 339780 0.6 0.0 > > > I do not see a way to actually limit the number of ceph-fuse threads > launched or to limit the max vm size each thread should take. > > Do you know how to limit those options. > > Cheers > > Goncalo > > > > > 1.> Try running ceph-fuse with valgrind --tool=memcheck to see if it's > leaking > > I have launched ceph-fuse with valgrind in the cluster where there is > sufficient memory available, and therefore, there is no object cacher > segfault. > > $ valgrind --log-file=/tmp/valgrind-ceph-fuse-10.2.2.txt --tool=memcheck > ceph-fuse --id mount_user -k /etc/ceph/ceph.client.mount_user.keyring -m > X.X.X.8:6789 -r /cephfs /coepp/cephfs > > This is the output which I get once I unmount the file system after user > application execution > > # cat valgrind-ceph-fuse-10.2.2.txt > ==12123== Memcheck, a memory error detector > ==12123== Copyright (C) 2002-2012, and GNU GPL'd, by Julian Seward et al. > ==12123== Using Valgrind-3.8.1 and LibVEX; rerun with -h for copyright info > ==12123== Command: ceph-fuse --id mount_user -k > /etc/ceph/ceph.client.mount_user.keyring -m 192.231.127.8:6789 -r /cephfs > /coepp/cephfs > ==12123== Parent PID: 11992 > ==12123== > ==12123== > ==12123== HEAP SUMMARY: > ==12123== in use at exit: 29,129 bytes in 397 blocks > ==12123== total heap usage: 14,824 allocs, 14,427 frees, 648,030 bytes > allocated > ==12123== > ==12123== LEAK SUMMARY: > ==12123== definitely lost: 16 bytes in 1 blocks > ==12123== indirectly lost: 0 bytes in 0 blocks > ==12123== possibly lost: 11,705 bytes in 273 blocks > ==12123== still reachable: 17,408 bytes in 123 blocks > ==12123== suppressed: 0 bytes in 0 blocks > ==12123== Rerun with --leak-check=full to see details of leaked memory > ==12123== > ==12123== For counts of detected and suppressed errors, rerun with: -v > ==12123== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 8 from 6) > ==12126== > ==12126== HEAP SUMMARY: > ==12126== in use at exit: 9,641 bytes in 73 blocks > ==12126== total heap usage: 31,363,579 allocs, 31,363,506 frees, > 41,389,143,617 bytes allocated > ==12126== > ==12126== LEAK SUMMARY: > ==12126== definitely lost: 28 bytes in 1 blocks > ==12126== indirectly lost: 0 bytes in 0 blocks > ==12126== possibly lost: 0 bytes in 0 blocks > ==12126== still reachable: 9,613 bytes in 72 blocks > ==12126== suppressed: 0 bytes in 0 blocks > ==12126== Rerun with --leak-check=full to see details of leaked memory > ==12126== > ==12126== For counts of detected and suppressed errors, rerun with: -v > ==12126== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 17 from 9) > > --- * --- > > 2.> Inspect inode count (ceph daemon <path to asok> status) to see if it's > obeying its limit > > This is the output I get once ceph-fuse is mounted but no user application > is running > > # ceph daemon /var/run/ceph/ceph-client.mount_user.asok status > { > "metadata": { > "ceph_sha1": "45107e21c568dd033c2f0a3107dec8f0b0e58374", > "ceph_version": "ceph version 10.2.2 > (45107e21c568dd033c2f0a3107dec8f0b0e58374)", > "entity_id": "mount_user", > "hostname": "<some host name>", > "mount_point": "\/coepp\/cephfs", > "root": "\/cephfs" > }, > "dentry_count": 0, > "dentry_pinned_count": 0, > "inode_count": 2, > "mds_epoch": 817, > "osd_epoch": 1005, > "osd_epoch_barrier": 0 > } > > > This is already when ceph-fuse reached 10g of virtual memory, and user > applications are hammering the filesystem. > > # ceph daemon /var/run/ceph/ceph-client.mount_user.asok status > { > "metadata": { > "ceph_sha1": "45107e21c568dd033c2f0a3107dec8f0b0e58374", > "ceph_version": "ceph version 10.2.2 > (45107e21c568dd033c2f0a3107dec8f0b0e58374)", > "entity_id": "mount_user", > "hostname": "<some host name>", > "mount_point": "\/coepp\/cephfs", > "root": "\/cephfs" > }, > "dentry_count": 13, > "dentry_pinned_count": 2, > "inode_count": 15, > "mds_epoch": 817, > "osd_epoch": 1005, > "osd_epoch_barrier": 1005 > } > > Once I kill the applications I get > > # ceph daemon /var/run/ceph/ceph-client.mount_user.asok status > { > "metadata": { > "ceph_sha1": "45107e21c568dd033c2f0a3107dec8f0b0e58374", > "ceph_version": "ceph version 10.2.2 > (45107e21c568dd033c2f0a3107dec8f0b0e58374)", > "entity_id": "mount_user", > "hostname": "<some host name>", > "mount_point": "\/coepp\/cephfs", > "root": "\/cephfs" > }, > "dentry_count": 38, > "dentry_pinned_count": 3, > "inode_count": 40, > "mds_epoch": 817, > "osd_epoch": 1005, > "osd_epoch_barrier": 1005 > } > > --- * --- > > 3.> Enable objectcacher debug (debug objectcacher = 10) and look at the > output (from the "trim" lines) to see if it's obeying its limit > > I've mounted ceph-fuse with debug objectcacher = 10, and filled the host > with user applications. I killed the applications when I saw ceph-fuse > virtual > memory stabilize at around 10g. > > Greping for the trim lines in the log, this is the structure I've found: > > 2016-07-11 01:55:46.314888 7f04c57fb700 10 objectcacher trim start: > bytes: max 209715200 clean 0, objects: max 1000 current 1 > 2016-07-11 01:55:46.314891 7f04c57fb700 10 objectcacher trim finish: > max 209715200 clean 0, objects: max 1000 current 1 > 2016-07-11 01:55:46.315009 7f04c75fe700 10 objectcacher trim start: > bytes: max 209715200 clean 0, objects: max 1000 current 2 > 2016-07-11 01:55:46.315012 7f04c75fe700 10 objectcacher trim finish: > max 209715200 clean 0, objects: max 1000 current 2 > <... snip ... > > 2016-07-11 01:56:09.444853 7f04c75fe700 10 objectcacher trim start: > bytes: max 209715200 clean 204608008, objects: max 1000 current 55 > 2016-07-11 01:56:09.444855 7f04c75fe700 10 objectcacher trim finish: > max 209715200 clean 204608008, objects: max 1000 current 55 > 2016-07-11 01:56:09.445010 7f04c57fb700 10 objectcacher trim start: > bytes: max 209715200 clean 204608008, objects: max 1000 current 55 > 2016-07-11 01:56:09.445011 7f04c57fb700 10 objectcacher trim finish: > max 209715200 clean 204608008, objects: max 1000 current 55 > 2016-07-11 01:56:09.798269 7f04c75fe700 10 objectcacher trim start: > bytes: max 209715200 clean 210943832, objects: max 1000 current 55 > 2016-07-11 01:56:09.798272 7f04c75fe700 10 objectcacher trim trimming > bh[ 0x7f04a8016100 96~59048 0x7f04a8014cd0 (59048) v 3 clean firstbyte=1] > waiters = {} > 2016-07-11 01:56:09.798284 7f04c75fe700 10 objectcacher trim trimming > bh[ 0x7f04b4011550 96~59048 0x7f04b4010430 (59048) v 4 clean firstbyte=1] > waiters = {} > 2016-07-11 01:56:09.798294 7f04c75fe700 10 objectcacher trim trimming > bh[ 0x7f04b001bea0 61760~4132544 0x7f04b4010430 (4132544) v 24 clean > firstbyte=71] waiters = {} > 2016-07-11 01:56:09.798395 7f04c75fe700 10 objectcacher trim finish: > max 209715200 clean 206693192, objects: max 1000 current 55 > 2016-07-11 01:56:09.798687 7f04c57fb700 10 objectcacher trim start: > bytes: max 209715200 clean 206693192, objects: max 1000 current 55 > 2016-07-11 01:56:09.798689 7f04c57fb700 10 objectcacher trim finish: > max 209715200 clean 206693192, objects: max 1000 current 55 > <... snip ...> > 2016-07-11 01:56:10.494928 7f04c75fe700 10 objectcacher trim start: > bytes: max 209715200 clean 210806408, objects: max 1000 current 55 > 2016-07-11 01:56:10.494931 7f04c75fe700 10 objectcacher trim trimming > bh[ 0x7f04b401a760 61760~4132544 0x7f04a8014cd0 (4132544) v 32 clean > firstbyte=71] waiters = {} > 2016-07-11 01:56:10.495058 7f04c75fe700 10 objectcacher trim finish: > max 209715200 clean 206673864, objects: max 1000 current 55 > <... snip ...> > 2016-07-11 01:57:08.333503 7f04c6bfd700 10 objectcacher trim start: > bytes: max 209715200 clean 211528796, objects: max 1000 current 187 > 2016-07-11 01:57:08.333507 7f04c6bfd700 10 objectcacher trim trimming > bh[ 0x7f04b0b370e0 0~4194304 0x7f04b09f2630 (4194304) v 404 clean > firstbyte=84] waiters = {} > 2016-07-11 01:57:08.333708 7f04c6bfd700 10 objectcacher trim finish: > max 209715200 clean 207334492, objects: max 1000 current 187 > 2016-07-11 01:57:08.616143 7f04c61fc700 10 objectcacher trim start: > bytes: max 209715200 clean 209949683, objects: max 1000 current 188 > 2016-07-11 01:57:08.616146 7f04c61fc700 10 objectcacher trim trimming > bh[ 0x7f04a8bfdd60 0~4194304 0x7f04a8bfe660 (4194304) v 407 clean > firstbyte=84] waiters = {} > 2016-07-11 01:57:08.616303 7f04c61fc700 10 objectcacher trim finish: > max 209715200 clean 205755379, objects: max 1000 current 188 > 2016-07-11 01:57:08.936060 7f04c57fb700 10 objectcacher trim start: > bytes: max 209715200 clean 205760010, objects: max 1000 current 189 > 2016-07-11 01:57:08.936063 7f04c57fb700 10 objectcacher trim finish: > max 209715200 clean 205760010, objects: max 1000 current 189 > 2016-07-11 01:58:02.918322 7f04f27f4e40 10 objectcacher release trimming > object[100003dffd9.00000000/head oset 0x7f04d4045c98 wr 566/566] > 2016-07-11 01:58:02.918335 7f04f27f4e40 10 objectcacher release trimming > object[100003dffd5.00000000/head oset 0x7f04d403e378 wr 564/564] > <... snip...> > 2016-07-11 01:58:02.924699 7f04f27f4e40 10 objectcacher release trimming > object[100003dffc4.0000000f/head oset 0x7f04d402b308 wr 557/557] > 2016-07-11 01:58:02.924717 7f04f27f4e40 10 objectcacher release trimming > object[100003dffc5.00000000/head oset 0x7f04d40026b8 wr 541/541] > 2016-07-11 01:58:02.924769 7f04f27f4e40 10 objectcacher release trimming > object[100003dffc8.00000000/head oset 0x7f04d4027818 wr 547/547] > <... snip...> > 2016-07-11 01:58:02.925879 7f04f27f4e40 10 objectcacher release_set on > 0x7f04d401a568 dne > 2016-07-11 01:58:02.925881 7f04f27f4e40 10 objectcacher release_set on > 0x7f04d401b078 dne > 2016-07-11 01:58:02.957626 7f04e57fb700 10 objectcacher flusher finish > > So, if I am understanding this correctly, every time the client_oc_size > bytes of cached data is above 200M bytes, it is trimmed and the values is > well kepted near its limit. > > > --- * --- > > 4.> See if fuse_disable_pagecache setting makes a difference > > It doesn't seem to make a difference. I've set in ceph config > > # grep fuse /etc/ceph/ceph.conf > fuse_disable_pagecache = true > > on this client (I guess I do not have to do it in the overall cluster). > Then, I've remounted cephfs via ceph-fuse and filled the host with user > applications. > > Almost immediatly this is what I got: > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 28681 root 20 0 8543m 248m 5948 S 4.0 0.5 0:02.73 ceph-fuse > 5369 root 20 0 3131m 231m 12m S 0.0 0.5 26:22.90 > dsm_om_connsvcd > 1429 goncalo 20 0 1595m 98m 32m R 99.5 0.2 1:04.34 python > 1098 goncalo 20 0 1596m 86m 20m R 99.9 0.2 1:04.29 python > 994 goncalo 20 0 1594m 86m 20m R 99.9 0.2 1:04.16 python > 31928 goncalo 20 0 1595m 86m 19m R 99.9 0.2 1:04.76 python > 16852 goncalo 20 0 1596m 86m 19m R 99.9 0.2 1:06.16 python > 16846 goncalo 20 0 1594m 84m 19m R 99.9 0.2 1:06.05 python > 29595 goncalo 20 0 1594m 83m 19m R 100.2 0.2 1:05.57 python > 29312 goncalo 20 0 1594m 83m 19m R 99.9 0.2 1:05.01 python > 31979 goncalo 20 0 1595m 82m 19m R 100.2 0.2 1:04.82 python > 29333 goncalo 20 0 1594m 82m 19m R 99.5 0.2 1:04.94 python > 29609 goncalo 20 0 1594m 82m 19m R 99.9 0.2 1:05.07 python > > > 5.> Also, is the version of fuse the same on the nodes running 9.2.0 vs. the > nodes running 10.2.2? > > In 10.2.2 I've compiled with fuse 2.9.7 while in 9.2.0 I've compiled against > the default sl6 fuse libs version 2.8.7. However, as I said before, I am > seeing the same issue with 9.2.0 (although with a bit less of used virtual > memory in total). > > > > > On 07/08/2016 10:53 PM, John Spray wrote: > > On Fri, Jul 8, 2016 at 8:01 AM, Goncalo Borges > <goncalo.bor...@sydney.edu.au> wrote: > > Hi Brad, Patrick, All... > > I think I've understood this second problem. In summary, it is memory > related. > > This is how I found the source of the problem: > > 1./ I copied and adapted the user application to run in another cluster of > ours. The idea was for me to understand the application and run it myself to > collect logs and so on... > > 2./ Once I submit it to this other cluster, every thing went fine. I was > hammering cephfs from multiple nodes without problems. This pointed to > something different between the two clusters. > > 3./ I've started to look better to the segmentation fault message, and > assuming that the names of the methods and functions do mean something, the > log seems related to issues on the management of objects in cache. This > pointed to a memory related problem. > > 4./ On the cluster where the application run successfully, machines have > 48GB of RAM and 96GB of SWAP (don't know why we have such a large SWAP size, > it is a legacy setup). > > # top > top - 00:34:01 up 23 days, 22:21, 1 user, load average: 12.06, 12.12, > 10.40 > Tasks: 683 total, 13 running, 670 sleeping, 0 stopped, 0 zombie > Cpu(s): 49.7%us, 0.6%sy, 0.0%ni, 49.7%id, 0.1%wa, 0.0%hi, 0.0%si, > 0.0%st > Mem: 49409308k total, 29692548k used, 19716760k free, 433064k buffers > Swap: 98301948k total, 0k used, 98301948k free, 26742484k cached > > 5./ I have noticed that ceph-fuse (in 10.2.2) consumes about 1.5 GB of > virtual memory when there is no applications using the filesystem. > > 7152 root 20 0 1108m 12m 5496 S 0.0 0.0 0:00.04 ceph-fuse > > When I only have one instance of the user application running, ceph-fuse (in > 10.2.2) slowly rises with time up to 10 GB of memory usage. > > if I submit a large number of user applications simultaneously, ceph-fuse > goes very fast to ~10GB. > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 18563 root 20 0 10.0g 328m 5724 S 4.0 0.7 1:38.00 ceph-fuse > 4343 root 20 0 3131m 237m 12m S 0.0 0.5 28:24.56 dsm_om_connsvcd > 5536 goncalo 20 0 1599m 99m 32m R 99.9 0.2 31:35.46 python > 31427 goncalo 20 0 1597m 89m 20m R 99.9 0.2 31:35.88 python > 20504 goncalo 20 0 1599m 89m 20m R 100.2 0.2 31:34.29 python > 20508 goncalo 20 0 1599m 89m 20m R 99.9 0.2 31:34.20 python > 4973 goncalo 20 0 1599m 89m 20m R 99.9 0.2 31:35.70 python > 1331 goncalo 20 0 1597m 88m 20m R 99.9 0.2 31:35.72 python > 20505 goncalo 20 0 1597m 88m 20m R 99.9 0.2 31:34.46 python > 20507 goncalo 20 0 1599m 87m 20m R 99.9 0.2 31:34.37 python > 28375 goncalo 20 0 1597m 86m 20m R 99.9 0.2 31:35.52 python > 20503 goncalo 20 0 1597m 85m 20m R 100.2 0.2 31:34.09 python > 20506 goncalo 20 0 1597m 84m 20m R 99.5 0.2 31:34.42 python > 20502 goncalo 20 0 1597m 83m 20m R 99.9 0.2 31:34.32 python > > 6./ On the machines where the user had the segfault, we have 16 GB of RAM > and 1GB of SWAP > > Mem: 16334244k total, 3590100k used, 12744144k free, 221364k buffers > Swap: 1572860k total, 10512k used, 1562348k free, 2937276k cached > > 7./ I think what is happening is that once the user submits his sets of > jobs, the memory usage goes to the very limit on this type machine, and the > raise is actually to fast that ceph-fuse segfaults before OOM Killer can > kill it. > > 8./ We have run the user application in the same type of machines but with > 64 GB of RAM and 1GB of SWAP, and everything goes fine also here. > > > So, in conclusion, our second problem (besides the locks which was fixed by > Pat patch) is the memory usage profile of ceph-fuse in 10.2.2 which seems to > be very different than what it was in ceph-fuse 9.2.0. > > Are there any ideas how can we limit the virtual memory usage of ceph-fuse > in 10.2.2? > > The fuse client is designed to limit its cache sizes: > client_cache_size (default 16384) inodes of cached metadata > client_oc_size (default 200MB) bytes of cached data > > We do run the fuse client with valgrind during testing, so it it is > showing memory leaks in normal usage on your system then that's news. > > The top output you've posted seems to show that ceph-fuse only > actually has 328MB resident though? > > If you can reproduce the memory growth, then it would be good to: > * Try running ceph-fuse with valgrind --tool=memcheck to see if it's > leaking > * Inspect inode count (ceph daemon <path to asok> status) to see if > it's obeying its limit > * Enable objectcacher debug (debug objectcacher = 10) and look at the > output (from the "trim" lines) to see if it's obeying its limit > * See if fuse_disable_pagecache setting makes a difference > > Also, is the version of fuse the same on the nodes running 9.2.0 vs. > the nodes running 10.2.2? > > John > > Cheers > Goncalo > > > > On 07/08/2016 09:54 AM, Brad Hubbard wrote: > > Hi Goncalo, > > If possible it would be great if you could capture a core file for this with > full debugging symbols (preferably glibc debuginfo as well). How you do > that will depend on the ceph version and your OS but we can offfer help > if required I'm sure. > > Once you have the core do the following. > > $ gdb /path/to/ceph-fuse core.XXXX > (gdb) set pag off > (gdb) set log on > (gdb) thread apply all bt > (gdb) thread apply all bt full > > Then quit gdb and you should find a file called gdb.txt in your > working directory. > If you could attach that file to http://tracker.ceph.com/issues/16610 > > Cheers, > Brad > > On Fri, Jul 8, 2016 at 12:06 AM, Patrick Donnelly <pdonn...@redhat.com> > wrote: > > On Thu, Jul 7, 2016 at 2:01 AM, Goncalo Borges > <goncalo.bor...@sydney.edu.au> wrote: > > Unfortunately, the other user application breaks ceph-fuse again (It is a > completely different application then in my previous test). > > We have tested it in 4 machines with 4 cores. The user is submitting 16 > single core jobs which are all writing different output files (one per job) > to a common dir in cephfs. The first 4 jobs run happily and never break > ceph-fuse. But the remaining 12 jobs, running in the remaining 3 machines, > trigger a segmentation fault, which is completely different from the other > case. > > ceph version 10.2.2 (45107e21c568dd033c2f0a3107dec8f0b0e58374) > 1: (()+0x297fe2) [0x7f54402b7fe2] > 2: (()+0xf7e0) [0x7f543ecf77e0] > 3: (ObjectCacher::bh_write_scattered(std::list<ObjectCacher::BufferHead*, > std::allocator<ObjectCacher::BufferHead*> >&)+0x36) [0x7f5440268086] > 4: (ObjectCacher::bh_write_adjacencies(ObjectCacher::BufferHead*, > std::chrono::time_point<ceph::time_detail::real_clock, > std::chrono::duration<unsigned long, std::ratio<1l, 1000000000l> > >, long*, > int*)+0x22c) [0x7f5440268a3c] > 5: (ObjectCacher::flush(long)+0x1ef) [0x7f5440268cef] > 6: (ObjectCacher::flusher_entry()+0xac4) [0x7f5440269a34] > 7: (ObjectCacher::FlusherThread::entry()+0xd) [0x7f5440275c6d] > 8: (()+0x7aa1) [0x7f543ecefaa1] > 9: (clone()+0x6d) [0x7f543df6893d] > NOTE: a copy of the executable, or `objdump -rdS <executable>` is needed to > interpret this. > > This one looks like a very different problem. I've created an issue > here: http://tracker.ceph.com/issues/16610 > > Thanks for the report and debug log! > > -- > Patrick Donnelly > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > -- > Goncalo Borges > Research Computing > ARC Centre of Excellence for Particle Physics at the Terascale > School of Physics A28 | University of Sydney, NSW 2006 > T: +61 2 93511937 > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > -- > Goncalo Borges > Research Computing > ARC Centre of Excellence for Particle Physics at the Terascale > School of Physics A28 | University of Sydney, NSW 2006 > T: +61 2 93511937 > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
