Hi Brad, You are correct. the librados.so has the symbol but what I copied is a wrong file. Now I can test the striper api with the previous C example and this cpp example: http://mrbojangles3.github.io/ceph/systems/striping/alignment/2017/05/28/Ceph-Stripe/ Both are working, but I haven't got any performance number yet. ps. I also found that the stripe unit must be set before object_size properly.
Thanks much. Best, Jialin NERSC On Tue, May 29, 2018 at 7:11 PM, Brad Hubbard <bhubb...@redhat.com> wrote: > On Wed, May 30, 2018 at 11:52 AM, Jialin Liu <jaln...@lbl.gov> wrote: > > Thanks Brad, > > I run nm on those .so file, it prints 'no symbol' > > OK, well you need to link to a library that exports that symbol (has > it defined in its Text section). I suspect you'll find it is defined > in libceph-common.so so try linking to that explicitly. > > > > > Then with ldd librados.so, I don't see the libceph-common.so, instead: > >> > >> jialin@cori12: ldd librados.so > >> linux-vdso.so.1 (0x00002aaaaaacf000) > >> libboost_thread-mt.so.1.53.0 > >> =>/rados_install/lib/libboost_thread-mt.so.1.53.0 (0x00002aaaad24d000) > >> libboost_system-mt.so.1.53.0 => > >> /rados_install/lib/libboost_system-mt.so.1.53.0 (0x00002aaaad464000) > >> libssl3.so => /usr/lib64/libssl3.so (0x00002aaaad668000) > >> libsmime3.so => /usr/lib64/libsmime3.so (0x00002aaaad8b4000) > >> libnss3.so => /usr/lib64/libnss3.so (0x00002aaaadadb000) > >> libnssutil3.so => /usr/lib64/libnssutil3.so (0x00002aaaaddfe000) > >> libplds4.so => /usr/lib64/libplds4.so (0x00002aaaae02c000) > >> libplc4.so => /usr/lib64/libplc4.so (0x00002aaaae230000) > >> libnspr4.so => /usr/lib64/libnspr4.so (0x00002aaaae435000) > >> libpthread.so.0 => /lib64/libpthread.so.0 (0x00002aaaae673000) > >> libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaae890000) > >> libuuid.so.1 => /usr/lib64/libuuid.so.1 (0x00002aaaaea94000) > >> librt.so.1 => /lib64/librt.so.1 (0x00002aaaaec99000) > >> libstdc++.so.6 => /usr/lib64/libstdc++.so.6 (0x00002aaaaeea1000) > >> libm.so.6 => /lib64/libm.so.6 (0x00002aaaaf22a000) > >> libc.so.6 => /lib64/libc.so.6 (0x00002aaaaf527000) > >> libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002aaaaf8c8000) > >> libz.so.1 => /lib64/libz.so.1 (0x00002aaaafadf000) > >> /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) > > Things were obviously different in jewel but the concept remains the > same. For each external symbol your binary requires you need to link > to a library that exports that symbol so finding the library that > exports the symbols in the error message should resolve the error. > > > > > > > I also found this thread: http://tracker.ceph.com/issues/14788 > > which looks similar to the error I run into, and that thread mentioned > the > > version between the headers file and the .so file, I think in my case > both > > of them are v10.2.10, which should ok. > > > > Best, > > Jialin, > > > > On Tue, May 29, 2018 at 6:17 PM, Brad Hubbard <bhubb...@redhat.com> > wrote: > >> > >> On Wed, May 30, 2018 at 10:42 AM, Jialin Liu <jaln...@lbl.gov> wrote: > >> > Hi, > >> > I'm trying to use the libradosstriper api, but having some trouble in > >> > linking to lradosstriper. I copied only the `required' libraries from > an > >> > pre-installed ceph (10.2.10), and put them under my local directory > >> > /rados_install/lib and rados_install/include, on a linux machine. > >> > > >> > /rados_install/lib: > >> >> > >> >> libboost_date_time.so.1.53.0 libboost_system.so.1.53.0 > >> >> libboost_filesystem-mt.so.1.53.0 libboost_thread-mt.so.1.53.0 > >> >> libboost_filesystem.so.1.53.0 libcephfs.so.1.0.0 > >> >> libboost_iostreams-mt.so.1.53.0 > >> >> libboost_iostreams.so.1.53.0 > >> >> libboost_random-mt.so.1.53.0 librados.so.2.0.0 > >> >> libboost_regex.so.1.53.0 librados_tp.so.2.0.0 > >> >> libboost_system-mt.so.1.53.0 libradosstriper.so.1.0.0 > >> >> libcephfs.so librados.so libradosstriper.so > >> > > >> > > >> > /rados_install/include: > >> >> > >> >> |-- rados > >> >> | |-- buffer.h -> ../buffer.h > >> >> | |-- buffer_fwd.h -> ../buffer_fwd.h > >> >> | |-- crc32c.h -> ../crc32c.h > >> >> | |-- inline_memory.h -> ../inline_memory.h > >> >> | |-- librados.h > >> >> | |-- librados.hpp > >> >> | |-- librgw.h > >> >> | |-- memory.h -> ../memory.h > >> >> | |-- objclass.h > >> >> | |-- page.h -> ../page.h > >> >> | |-- rados_types.h > >> >> | |-- rados_types.hpp > >> >> | `-- rgw_file.h > >> >> `-- radosstriper > >> >> |-- libradosstriper.h > >> >> `-- libradosstriper.hpp > >> > > >> > > >> > The test code is simple, as attached, and I compiled it with dynamic > >> > linking: > >> >> > >> >> cc -L/rados_install/lib -I/rados_install/include -o librados_test > >> >> librados_test.c -lrados -lradosstriper > >> > > >> > > >> > But got the following message, can anyone plz advise? > >> > > >> >> > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::ptr::ptr(ceph::buffer::ptr&&)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::ptr::operator=(ceph::buffer::ptr&&)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `librados::IoCtx::remove(std::string const&, int)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::list::iterator::iterator(ceph::buffer::list*, > unsigned > >> >> int)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::list::is_provided_buffer(char const*) const' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::list::append(ceph::buffer::ptr&&)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::list::iterator::iterator(ceph::buffer::list*, > unsigned > >> >> int, > >> >> std::_List_iterator<ceph::buffer::ptr>, unsigned int)' > >> >> /rados_install/lib/libradosstriper.so: undefined reference to > >> >> `ceph::buffer::list::list(ceph::buffer::list&&)' > >> > >> Try doing the following in your lib directory. > >> > >> $ nm -A -C *.so|grep is_provided_buffer > >> libceph-common.so:0000000000223df0 T > >> ceph::buffer::list::is_provided_buffer(char const*) const > >> librados.so:00000000000bfef0 T > >> ceph::buffer::list::is_provided_buffer(char const*) const > >> libradosstriper.so: U > >> ceph::buffer::list::is_provided_buffer(char const*) const > >> > >> 'ldd librados.so' shows it links to libceph-common.so so I suspect you > >> may need that library. > >> > >> Don't forget that you need to tell the linker where to find these > >> libraries at runtime so you will need to pass something like > >> '-Wl,-rpath=/rados_install/lib' to the compiler so it finds the > >> correct versions of the libraries (you can check which ones it will > >> find with 'ldd librados_test'. > >> > >> HTH > >> > >> > > >> > > >> > Best, > >> > Jialin > >> > NERSC > >> > > >> > _______________________________________________ > >> > ceph-users mailing list > >> > ceph-users@lists.ceph.com > >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >> > > >> > >> > >> > >> -- > >> Cheers, > >> Brad > > > > > > > > -- > Cheers, > Brad >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com