On Thu, 8 Jan 2009, Eric Cables wrote: > I'm in the middle of a transition from HP -> Cisco, with an HP 2848 as the > "core", so sorry if this e-mail is off topic. I am having a hard time > getting DHCP relay to work, and was hoping someone with HP experience could > chime in with some assistance. > > I've created a new VLAN, and have specified a helper-address to point to a > DHCP server that manages dozens of scopes. The new VLAN functions fine, > assuming users are given a static address, but DHCP does not appear to work > at all.
Hi Eric, I'm not sure how helpful this might be (it seems you've already taken the necessary steps), but here's a cut and paste from a production switch doing the same thing (a 5400 in this case): vlan 4071 name "VLAN4071" ip helper-address 10.144.16.2 ip address 10.144.1.65 255.255.255.192 tagged A1-A4,Trk1 exit HTH, -j -- Jeremy L. Gaddis http://evilrouters.net _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/