Follow-up... the secondary booted up OK. We're looking at a possible RMA on the failing one (TAC case open) rather than cracking the case on a virgin switch to mess with flash :).
Jeff On 12/6/2013 11:25 PM, Jeff Kell wrote: > We received our first pair of 4500X switches, and proceeded to try to > prepare them for deployment. They came up OK on console access, we got > a very basic configuration setup, linked them together, and did an > initial VSS pairing. > > With that successful, we put in a management IP address for the > management port, saved everything, and proceeded to move them to the > server room. > > Upon power-up at the new location, they won't boot... > >> **************************************************************** >> * * >> * Rom Monitor NVRAM configuration is being initialized to * >> * default values. This may be because it was never initialized.* >> * * >> **************************************************************** >> Writing to Primary Region failed >> Writing to Backup Region failed >> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
