Hello Stuart, looks like you are right, I will try to reboot in the next maintenance window and check if it works now.
xxxx#remote command switch show bootvar BOOT variable = bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin,1; CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0xA141 xxxx(config)#config-register 0x2102 xxxx#remote command switch show bootvar BOOT variable = bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin,1; CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0xA141 (will be 0x2102 at next reload) kind regards Rolf > > Check the value of the config register on the SP (remote command switch > show bootvar). Odd things can happen if the SP and RP have different > values for the config register. > > > -----Original Message----- > From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of > "Rolf HanÃen" > Sent: 24 January 2014 00:19 > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] Sup720 ignores boot variable > > Hi, > > I am wondering why this sup720 ignores my boot variable and always boots > the first image it finds. > > "dir" shows: > ---------------------- > Directory of sup-bootdisk:/ > > 1 -rw- 78212100 Jul 6 2010 17:27:04 +00:00 > s72033-advipservicesk9_wan-mz.122-33.SXH2.bin > 2 -rw- 33554432 Jul 6 2010 17:36:30 +00:00 sea_log.dat > 3 -rw- 143347044 Jan 16 2014 21:47:46 +00:00 > s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin > ---------------------- > > I tried: > boot system flash bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin > as well as > boot system flash > sup-bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin > I removed the old boot entry. > > after "wr mem" "sh bootvar" shows: > ---------------------- > BOOT variable = > (sup-)bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin,1; > CONFIG_FILE variable = > BOOTLDR variable = > Configuration register is 0x2102 > > Standby is not present. > ---------------------- > > In both cases result is: > ---------------------- > Autoboot executing command: "boot bootdisk:" > > Initializing ATA monitor library... > string is bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXH2.bin > Loading image, please wait ... > ---------------------- > > If I delete s72033-advipservicesk9_wan-mz.122-33.SXH2.bin it starts > s72033-advipservicesk9_wan-mz.122-33.SXJ6.bin > (which is now first image rommon finds). > sh version: > ---------------------- > Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), > Version 12.2(33)SXJ6, RELEASE SOFTWARE (fc3) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2013 by Cisco Systems, Inc. > Compiled Fri 19-Jul-13 03:30 by prod_rel_team > > ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1) > ... > ---------------------- > > I then upgraded rommon (sp with c6ksup720-rm2.8-5-4.srec, rp with > c6msfc3-rm2.srec.122-17r.SX7) but still shows: > Autoboot executing command: "boot bootdisk:" > > Is there some kind of sync issue or rommon bug or did I forget something ? > > kind regards > Rolf > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > âTo our Members we're the 4th Emergency Service " > This electronic message contains information from AA Corporation Limited > or from a member, or members, of its group of companies which may be > privileged or confidential. The information is intended to be for the use > of the individual(s) or entity named above. If you are not the intended > recipient, please delete this e-mail immediately. The contents of this > e-mail must not be disclosed or copied without the sender's consent. We > cannot accept any responsibility for viruses, so please scan all > attachments. > No changes to Terms and Conditions of trade can be accepted through e-mail > communication. All changes to Terms and Conditions must be in writing > evidenced by a director of the company and in hard copy format. The > statements and opinions expressed in this message are those of the author > and do not necessarily reflect those of the company. The company does not > take any responsibility for the views of the author. â > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/