No. They had everything they needed. Considering the volume and the size of the kind of cylinders they usually deal with, I got the impression that fixing my ‘dinky little cylinder’ was something they could do over lunchtime— especially since the bore was fine. While I might be simplifying it a little, I think they cleaned it up, replaced all the O-rings, tested it for holding pressure and were done.
Although hardly an expert on hydraulics, I think the technology has been around a lot longer than Navtec. Good luck, Charlie Nelson Sent from the all new AOL app for iOS On Thursday, April 15, 2021, 6:10 PM, Riley Anderson <svfreighttr...@gmail.com> wrote: Charlie, that's good to hear. Did you also have to buy the seal kit or did the hydraulic shop have what you need? On Thu, Apr 15, 2021 at 6:06 PM cenelson via CnC-List <cnc-list@cnc-list.com> wrote: I had mine rebuilt at a local hydraulic shop (lots of farmer implements use hydraulics) about 8 yrs ago for $260. Still no leaks—! Charlie Nelson Sent from the all new AOL app for iOS On Thursday, April 15, 2021, 5:54 PM, Riley Anderson via CnC-List <cnc-list@cnc-list.com> wrote: Hello all, I'm getting rid of my Navtec backstay adjuster, it needs a rebuild ($620 from Navtec). I put it on eBay for cheap, but I'm only going to leave the listing up for a month. If it doesn't sell in that time, consider it free to any lister who wants it. My guess is shipping should be about $30-40. The model number is IA7-10, pulled it from my 1976 38-ii. Navtec says these are from 1989-1999. Here is the link to the listing if you just can't wait. Photos are on the listing. -- Fair winds and following seas, Charlotte Freeland & Riley AndersonSV Freight TrainMiddletown, CT USAThanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Fair winds and following seas, Charlotte Freeland & Riley AndersonSV Freight TrainMiddletown, CT USA
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu