I think that is exactly what happened to me. I will confirm when I get to the boat on Wednesday. Dave
David Knecht Rear Commodore Thames Yacht Club New London, CT > On Sep 4, 2022, at 5:58 PM, Nate Flesness via CnC-List > <cnc-list@cnc-list.com> wrote: > > Parmax1 is NOT pressure limited. > Parmax 1 Pressure Limited, is! > > Nice labeling huh? > I bought the wrong one too... > > Nate Flesness > > On Thu, Sep 1, 2022 at 9:40 AM David Knecht via CnC-List > <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: > I am back to working on the freshwater pump problem. I replaced the old pump > (unknown age) with the same model Jabsco ParMax 1 that had failed and now it > is pressurizing the system, so the old pump was definitely the problem. > However, the new pump will not shut off, even if left for extended time. I > can find no water or air leaks and the system stays pressurized enough to get > water from the sink days after running the pump, so it does not seem to have > a leak on the outlet side. I am stumped as to why it will not shut off. > Suggestions? Dave > > S/V Aries > 1990 C&C 34+ > New London, CT > > <pastedGraphic.tiff> > >> On Aug 9, 2022, at 3:17 PM, Chris Riedinger <chris.riedin...@gmail.com >> <mailto:chris.riedin...@gmail.com>> wrote: >> >> The new shurflo is 4138-111-E65 >> >> It's 12v, 6.5a max and 3gpm. It's got 55psi auto shutoff >> >> On Tue, Aug 9, 2022, 6:41 AM Chris Riedinger <chris.riedin...@gmail.com >> <mailto:chris.riedin...@gmail.com>> wrote: >> Was a jabsco, I replaced with sureflo. >> >> I can't find the model# on my log- I'll take a peek down there this morning >> . >> >> On Tue, Aug 9, 2022, 6:17 AM David Knecht <davidakne...@gmail.com >> <mailto:davidakne...@gmail.com>> wrote: >> I can hear and feel the pump running fine, so I don’t think it is a >> connection issue. What pump did you replace yours with? Dave >> >> S/V Aries >> 1990 C&C 34+ >> New London, CT >> >> >> >>> On Aug 8, 2022, at 10:35 PM, Chris Riedinger <chris.riedin...@gmail.com >>> <mailto:chris.riedin...@gmail.com>> wrote: >>> >>> Checking breakers or fuses >>> >>> Any connections made - any corrosion in there? Are you getting >>> (batteryV+)12v or only 10.2 indicating a possible short >>> >>> Our water pump, which I believe was the original, just died last year and I >>> swapped it out. I wish I had done that sooner, the new pump is both quieter >>> and uses less aH >>> >>> >>> >>> Swaloon 37/40+ >>> >>> On Mon, Aug 8, 2022, 7:26 PM David Knecht via CnC-List >>> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: >>> Hi Folks- I found that my fresh water pump was running continuously today >>> and not pressurizing the system and not cutting out when pressurized. I >>> confirmed there was water in the tanks and flow to the manifold that >>> controls tank choice. But there was no water in the filter after the >>> manifold and before the pump. I removed the hose connecting the >>> manifold/filter to the pump and when I sucked on it, I got water, so >>> nothing appears blocked. When I turned the pump on (Par-Max4), I could not >>> feel any suction on the opening. I presume these are self-priming pumps, >>> so I should have felt some pull. The pump is 30 years old, so I am >>> presuming it is just dead, but wondering if there is any other scenario >>> that might make it not work before I replace it. Thanks- Dave >>> >>> S/V Aries >>> 1990 C&C 34+ >>> New London, CT >>> >>> >>> >>> <pastedGraphic.tiff><pastedGraphic.tiff> >> >