Joe, Can you run under the stove then up the forward side between the stove and the forward half bulkhead? I might not be visualizing accurately. -- Dennis C. Touche' 35-1 #83 Mandeville, LA
On Fri, Jun 30, 2023 at 1:45 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > It FITS!!!!!!!!!!!!!!!!!!!!!!!! > > Yeah!!!!!! > > The side mounts are EXACTLY right. The only part that needs changing is > the hole where the gimbal lock goes, I need to drill it about ¾” forward of > where it is now. I am so relieved 😊 > > One issue I am not sure about is the sliding board that goes over the > stove. I had to run the propane hose straight up, going besides the icebox > is not possible because I foamed that all in about 20 years ago. That board > will contact the hose when retracted. I have though about cutting a little > half circle relief in it or just not using it. The cutting board from the > old stove will work if I cut about ½” off the outboard edge and it looks > nice. > > Note to Force 10 owners: The sparker is very fiddly. Some voltmeter > sleuthing uncovered the fact the battery holder cap needs to be screwed on > just so or the negative side of the battery does not make contact. Speaking > of, I bought some AA lithiums so I don’t have to climb under the stove and > swap it out anytime soon. > > > > > > Joe Della Barba > > Coquina C&C 35 MK I > > Kent Island MD USA > > > > > Please show your appreciation for this list and the Photo Album site and > help me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu > -- Dennis C. Touche' 35-1 #83 Mandeville, LA
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu