Holger Freyther schrieb: > On Wednesday 02 July 2008 23:48:59 Arne Zachlod wrote: > >> Hej guys, I had got my today and i have tested it, but my 3G card >> doesn't function with it. he can't find a network and is unable to get >> the pin. (i have disabled pin with another phone, then there was only >> the problem that he doesn't find a network). but with other SIM Cards >> form same provider there is no problem. >> and other, non-3G-phones hasn't problem with this card, too. >> i have no idea where i can find any informations. the gsm.log file >> doesn't exist and my gsm-firmware-version is moko8. So, my question is: >> does anybody else has a problem with 3G Sim card? >> > > In general minicom is your friend. Reenable the PIN on your simcard. execute > AT to see if the modem responds to you (kill other users if not), reset using > sysfs files if needed. > Once you get OK on an AT request do: > AT+CFUN=1 > AT+CPIN? > > it should ask for SIM PIN.. > > AT+CPIN=YOURPIN > AT+CPIN? > > it should say it is ready.. > > AT+CREG=1 > AT+COPS=0 > > you should see +CREG coming by. > > > alternatively if you have qpe installed. You can go > to /opt/Qtopia/etc/default/Trolltech/Log.conf change all Enabled = 0 to > Enabled = 1. Kill the qpe process, take a look > at /etc/X11/XSession.d/89qtopia, copy the two exports to your console, run > qpe and take a look at the chat qpe has with the modem. > > please share your results and if you don't know what I'm talking about ask. > > z. > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > I hope I have understood you correctly and did what u meant. this is the console output:
[EMAIL PROTECTED]:~# libgsmd-tool -m atcmd libgsm-tool - (C) 2006-2007 by Harald Welte and OpenMoko, Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY AT STR=`AT' RSTR=`OK' AT+CFUN=1 STR=`AT+CFUN=1' RSTR=`OK' AT+CPIN? STR=`AT+CPIN?' RSTR=`+CPIN: SIM PIN' AT+CPIN=XXXX STR=`AT+CPIN=XXXX' cme error: 3 RSTR=`+CME ERROR: 3' so, i don't know what this error means, but the PIN was right. i hope anyone can imagine something with this, because i can't ;) bye, Arne _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community