yochaigal <[EMAIL PROTECTED]> writes: > The key is to follow the wikis--- but make sure > you format and fill the sd card from a linux box, not from the phone. do > everything as root. also, make sure to update your u-boot so that it can > handle fat and ext file systems. finally, be very careful in uploading the > root filesystem -- -make sure you mount a .jffs2 (follow the wiki) on your > linux box and then FROM that you should create a tarball --- -which you THEN > and only THEN move over to the rootfs partition of the sd card. Otherwise > some important dev nodes get lost in the process. > > > wiki I used to start: > > http://wiki.openmoko.org/wiki/Booting_from_SD >
Thanks for your indications, but my goal is not to install a *new* system on the SD, but to *transfer* the current one to the SD. I guess it may be done from the FR itself... but I'm afraid it's difficult to move things from the very live system you're running. To do that on a desktop system, I would boot to single user first... but what about on a FR ? >> >> Would you recommend a good procedure for moving my 2007.2 system to SD >> ? And would it run fine from SD too, once moved ? >> Best regards, -- Olivier BERGER (OpenPGP: 1024D/B4C5F37F) http://www.olivierberger.com/weblog/ _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community