Just found out what the problem was: The Neo did not get enough power while I did use the USB connector trough the Debug Board while it did get enough power to work when I did connect the Neo directly to the computer!:)
On Thu, Sep 18, 2008 at 4:29 PM, Hypnotize <[EMAIL PROTECTED]>wrote: > Hi again, > > Sorry for my late answer but I havent had time to answer you before now. > > Yes the cable does fit in to the GTA02 and the Debug Board and the "Reset" > button on the Debug Board does reset the GTA02 (it does a hard restart of > the device or something?) but it still does not work. :( > > The openocd.conf that I use is the one from > http://wiki.openmoko.org/wiki/OpenOCD#OpenOCD_and_Debug_Board > > libftdi is version 0.13 > openocd is r130 (from svn) > > -Morten > > > On Fri, Sep 12, 2008 at 9:06 PM, Michael Shiloh <[EMAIL PROTECTED]>wrote: > >> andi wrote: >> > Lynn Nguyen wrote: >> >> Does the cable fit completely into your neo? Because my cable doesn't >> >> go straight in. Is there a technique to make it fit? Did you have any >> >> problems making it fit? Because I think my problem is that my cable >> >> doesn't go all the way in. >> >> >> > When you look at the contacts on the cable, you can see that there are >> > two rows, so you have to plug the cable pretty deep into the connector. >> > (I think I had only the first row in at the beginning...) On the >> > connector you can see how far you have to push the cable into the >> > connector. >> > There is no special technique. Just push it in. >> > >> > andi >> >> >> What I am seeing on a couple of connectors and phones is that the cable >> is a bit wider than the opening in the connector. Yes, I know that it >> has always been a tight fit, but I wonder if it has gotten worse, as I >> can't get the cable in at all now. >> >> Michael >> >> _______________________________________________ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
